2003 Toyota 4Runner Owners Manual - Page 633

'03 4Runner_U (L/O 0211) -Reinstalling wheel ornament CAUTION -After changing wheels 12. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 352 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. D Have the wheel nuts tightened by torque wrench at 110 N·m (11.5 kgf·m, 83 ft·lbf), as soon as possible after changing wheels. Otherwise, the nuts may loosen and the wheels may fall off, which could cause a serious accident. 11. Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. 13. Restow all the tools, jack and flat tire securely. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 352 in Section 8 with a torque wrench. Have a technician repair the flat tire. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 2003 4RUNNER from Oct. '02 Prod. (OM35804U) 287