2003 Toyota 4Runner Owners Manual - Page 757

'03 4Runner_U (L/O 0301) If the battery is disconnected or run down, the power back window may not operate automatically and the jam protection function will not function correctly after you reconnect, replace or recharge the battery. In any of these cases, you should normalize the power back window with the power back window switch. To normalize the power back window: 1. Push the "Ɲ" (down) switch and lower the window halfway. 2. Push the "Ɯ" (up) switch until the window closes and hold the switch for a second. Make sure that the window opens and closes automatically. If the power back window cannot be operated properly, have it checked by your Toyota dealer. OPERATING FROM INSIDE The ignition key must be in the "ON" position. Normal operation: To open or close the back window, quickly push and release the " Ɲ" (down) or " Ɯ" (up) switch. Automatic operation: To open or close the back window, push and hold the "Ɲ" (down) or "Ɯ" (up) switch. The window will fully open or close. To stop the window partway, push the switch on either the "Ɲ" (down) or "Ɯ" (up) side briefly. Key off operation: If both front doors are closed, it works for 43 seconds even after the ignition switch is turned off. It stops working when either front door is opened. Jam protection function: During automatic closing operation or key off closing operation, the window stops and opens half way if something gets caught between the window and window frame. If the window receives a strong impact, this function may work even if nothing is caught. If you push in the window lock switch on the driver's door, the back window cannot be operated. CAUTION D Never try jamming any part of your body to activate the jam protection function intentionally. D The jam protection function may not work if something gets caught just before the window is fully closed. 27 2003 4RUNNER from JAN. '03 Prod. (OM35806U)