2003 Toyota 4Runner Owners Manual - Page 88

'03 4Runner_U (L/O 0208) Tilt steering wheel CHILD RESTRAINT INSTALLATION Type A- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages around the tag on the seat cushion. 2. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages around the tag on the seat cushion. 2. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 84 in this section.) For the installation details, refer to the instruction manual equipped with each product. SYSTEM CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. This can cause death or serious injury to the child and front passenger in case of sudden braking or a collision. To change the steering hold the steering wheel, release lever toward you, ing wheel to the desired lease the lever. wheel angle, pull the lock tilt the steerangle and re- When the steering wheel is in a low position, it will spring up as you release the lock release lever. 88 2003 4RUNNER from Aug. '02 Prod. (OM35795U)