2003 Toyota 4Runner Navigation Manual - Page 373

4Runner_Navi_U (L/O 0301) 3. "MODE" button Push the "MODE" button to select an audio mode. Each time you push this button, the system changes between the radio, cassette tape player, compact disc player and DVD player. To turn the audio system on, push the "MODE" button. To turn the audio system off, push and hold the "MODE" button until the system turns off. Car audio system operating hints NOTICE To ensure the correct audio system operation: z Be careful not to spill beverages over the system. z Do not put anything other than a cassette tape or compact disc into the slot. z Do not put anything other than a magazine into the DVD player. z The use of cellular phone inside or near the vehicle may cause a noise from the speakers of the system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio-it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio: FM Fading and drifting stations-Generally, the effective range of FM is about 40 km (25 miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by distortion. Multi-path-FM signals are reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. 177 2003 4RUNNER Navigation from Jan. '03 Prod. (OM35808U)