2003 Toyota Camry Owners Manual - Page 238

'03Camry_U (L/O 0208) -Reinstalling wheel ornament (steel wheels only) -After changing wheels 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designed on page 274 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. If your vehicle becomes stuck If your vehicle becomes stuck in snow, mud, sand, etc., then you may attempt to rock the vehicle free by moving it forward and backward. If your vehicle is equipped with the traction control system, turn off the system to become unstuck. (For details, see "Traction control system" on page 108 in Section 1- 6.) CAUTION Do not attempt to rock the vehicle free by moving it forward and backward if people or objects are anywhere near the vehicle. During the rocking operation the vehicle may suddenly move forward or backward as it becomes unstuck, causing injury or damage to nearby people or objects. 10. Reinstall the wheel ornament. 1. Put the wheel ornament into position. Align the cutout of the wheel ornament with the valve stem as shown. 2. Tap it firmly with the side or heel of your hand to snap it into place. 12. Restow all the tools, jack and flat tire securely. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 274 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. 2003 MY CAMRY (OM33569U) 219