2003 Toyota Celica Owners Manual - Page 72

'03MY CELICA U (L/O 0208) Headlight beam level control Loading condition Driver only Driver + front passenger Full passengers (including driver) Full passengers (including driver) + full luggage loading Driver + full luggage loading TURN SIGNALS To signal a turn, push the headlight/ turn signal lever up or down to position 1. The key must be in the "ON" position. The lever automatically returns after you make a turn, but you may have to return it by hand after you change lanes. To signal a lane change, move the lever up or down to the pressure point (position 2) and hold it. If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. To adjust the headlight beam level, turn the dial. The following list shows examples of proper switch settings. For loading conditions other than those listed, adjust the switch position so that the beam level is the same as the one obtained according to the list when only the driver is in the vehicle. The higher the number of the switch position, the lower the headlight beam level. Always keep the headlight beam at the proper level, or your headlights may dazzle other road users. Dial position 0 0 1.5 2.5 4 72 2003 CELICA from Aug. '02 Prod. (OM20809U)