2003 Toyota Corolla Owners Manual - Page 68

'03 Corolla U (L/O 0201) Tilt steering wheel CHILD RESTRAINT INSTALLATION Type A- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages near the tag on the seatback. 2. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages near the tag on the seatback. 2. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 65 in this section.) For the installation details, refer to the instruction manual equipped with each product. SYSTEM CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages and that the seat belt is not caught. D Push and pull the child restraint system in different directions to make sure it is secure. Follow all the installation instructions provided by its manufacturer. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. This can cause death or serious injury to a child and front passenger in case of a sudden braking or collision. To change the steering wheel angle, hold the steering wheel, push down the lock release lever, tilt the steering wheel to the desired angle and return the lever to its original position. 68 2003 MY COROLLA_U (OM12744U)