2003 Toyota Land Cruiser Owners Manual - Page 295

Service specifications ENGINE Valve clearance (engine cold), mm (in.): Intake 0.15-0.25 (0.006-0.010) Exhaust 0.25-0.35 (0.010-0.014) Spark plug type: DENSO SK20R11 NGK IFR6A11 Spark plug gap, mm (in.): 1.1 (0.043) ENGINE LUBRICATION Oil capacity (drain and refill), L (qt., Imp. qt.) With filter 6.8 (7.2, 6.0) Without filter 6.4 (6.8, 5.6) Oil grade: Toyota Genuine Motor Oil is filled in your Toyota vehicle. Use Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following grade and viscosity. Oil grade: API grade, SL "Energy-Conserving" or ILSAC multigrade engine oil. Temperature range anticipated before next oil change Recommended oil viscosity: SAE 5W-30 COOLING SYSTEM Total capacity, L (qt., Imp. qt.) Without rear heater 14.7 (15.5, 12.9) With rear heater 15.4 (16.3, 13.6) Coolant type: Toyota Genuine Long Life Coolant is filled in your Toyota vehicle. In order to avoid technical problems, we strongly recommend using "Toyota Genuine Long Life Coolant" or equivalent. Please contact your Toyota dealer for further details. With ethylene-glycol type coolant for a proper corrosion protection of aluminum components Do not use alcohol type antifreeze or plain water alone. BATTERY Open voltage∗ at 20_C (68_F): 12.6-12.8 V Fully charged 12.2-12.4 V Half charged 11.8-12.0 V Discharged ∗: Please contact your Toyota dealer for further details. Voltage that is checked 20 minutes after the key is removed with all the lights turned off Charging rates: 5 A max. 295 2002 L/C100 from Aug. '02 Prod. (OM60986U)