2003 Toyota Land Cruiser Owners Manual - Page 296

AUTOMATIC TRANSMISSION Fluid capacity (drain and refill), L (qt., Imp. qt.) Up to 3.0 (3.2, 2.6) Fluid type: Toyota Genuine ATF Type T-IV Change automatic transmission fluid only as necessary. Generally, it is necessary to change automatic transmission fluid only if your vehicle is driven under one of the Special Operating Conditions listed in your "Scheduled Maintenance Guide" or "Owner's Manual Supplement". When changing the automatic transmission fluid, use only Toyota Genuine ATF Type T-IV (ATF JWS3309 or NWS6500) to aid in assuring optimum transaxle performance. Notice: Using automatic transmission fluid other than Toyota Genuine ATF Type T-IV may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle. TRANSFER Oil capacity, L (qt., Imp. qt.) 1.3 (1.4, 1.1) Oil type: Gear oil API GL-4 or GL-5 Recommended oil viscosity: SAE 75W-90 DIFFERENTIAL Oil capacity, L (qt., Imp. qt.): Front 1.6 (1.7, 1.4) Rear 3.3 (3.5, 2.9) Oil type: Standard differential Hypoid gear oil API GL-5 Limited-slip differential Hypoid gear oil for limited-slip differential API GL-5 Recommended oil viscosity: Above -18_C (0_F) SAE 90 Below -18_C (0_F) SAE 80W or 80W-90 CHASSIS LUBRICATION Wheel bearings: Lithium base NLGI No.2 wheel bearing grease, Front drive shaft thrust bushings: Synthetic oil and lithium soap chassis grease, NLGI No.1 Propeller shafts: Lithium base wheel NLGI No.2 BRAKES bearing base grease, Minimum pedal clearance when depressed with the force of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): 116 (4.6) Pedal free play, mm (in.): 1-6 (0.04-0.24) Pad wear limit, mm (in.): 1.0 (0.04) Lining wear limit, mm (in.): 1.0 (0.04) Parking brake adjustment when pulled with the force of 196 N (20 kgf, 44 lbf): 4-6 clicks Fluid type: SAE J1703 or FMVSS No.116 DOT 3 296 2002 L/C100 from Aug. '02 Prod. (OM60986U)