2003 Toyota Land Cruiser Owners Manual - Page 460

'03 L/C U (L/O 0301) If a tape side rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette player will play the other side of the tape, using the auto-reverse feature. Compact Disc Player If you want to fast forward or reverse through a compact disc track, push and hold in the fast forward or reverse button. When you release the button, the compact disc player will resume playing. AM button Push "AM" to turn on the radio and select the AM band. "AM" will appear on the display. If the audio system is off, you can turn on the radio by pushing "AM". Also, push "AM" to switch from cassette or compact disc operation to radio operation. AUDIO-TUNE Knob This knob is used to adjust the tone and balance or to tune the station manually on the radio mode. Tone and sound balance adjustment function- Each time you push the "AUDIO-TUNE" knob, the display changes as in the following. To adjust the tone and balance or turn on or off the automatic sound levelizer, turn the knob. BAS: Adjusts low-pitched tones. MID: Adjusts mid-pitched tones. TRE: Adjusts high-pitched tones. BAL: Adjusts the sound balance between the right and left speakers. FAD: Adjusts the sound balance between the front and rear speakers. ASL: Turns on or off the automatic sound levelizer. Automatic sound levelizer: When the audio sound becomes difficult to be heard due to road noise, wind noise, etc. during driving, the system adjusts to the optimum volume and tone quality according to the noise level. While the automatic sound levelizer is on, "ASL" appears on the display. Manual tuning function- Turn the knob. The radio will step up or down to another frequency. DISC (Compact Disc) button Push "DISC" to switch from radio or cassette operation to compact disc operation. If the audio system is off, you can turn on the compact disc player by pushing "DISC". In both cases, a disc must already be loaded in the player. When the audio is set into compact disc operation, the display shows the track or, track and disc number currently being played. If the player or another unit equipped with the player malfunctions, your audio system will display one of the three following error messages. If "WAIT" appears on the display, it indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove the disc from the player and allow the player to cool down. If "Err 1" appears on the display, it indicates the disc is dirty, damaged or label face down. Clean the disc or insert it correctly. 151