2003 Toyota Land Cruiser Navigation Manual - Page 131

(c) Selecting a station Your vehicle has an electronic tuning radio (ETR). Tune in the desired station using one of the following methods. Preset tuning: Touch the switch (1-6) or push the "Ɯ " or "Ɲ " button of the "CH" button for the station you want. The switch (1-6) is highlighted in green and station frequency appears on the display. Manual tuning: Turn the "TUNE" knob briefly. Each time you turn the knob, the radio will step up or down to another frequency. Scan tuning:Touch the "SCAN" switch briefly. "SCAN" appears on the display. The radio will find the next station up or down the band, stay there for a few seconds, and then scan again. To select a station, touch the "SCAN" switch a second time. Preset scan tuning: Touch the "SCAN" switch and hold it until you hear a beep. "P. SCAN" appears on the display. The radio will tune in the next preset station up or down the band, stay there for a few seconds, and then move to the next preset station. To select a station, touch the "SCAN" switch a second time. (d) RDS (Radio Data System) UNG612 Seek tuning: Push the "Ɯ " or "Ɲ " button of the "SEEK" button and hold it until you hear a beep. The radio will begin seeking up or down for a station of the nearest frequency and will stop on reception. Each time you push the button, the stations will be searched out one after another. TRAF (Traffic) function: A station that regularly broadcasts traffic information is automatically sought. When you push the "TRAF" button, "TRAF SEEK" appears on the display and the radio will start seeking any traffic program station. If any traffic program station is not found, "NOTHING" appears and the previous mode returns. If the traffic program station is found, the name for traffic program station is displayed and "TRAF" is lit for a while until traffic announcement is received. 123 2003 Land Cruiser 100 Navigation (OM60A00U)