2003 Toyota MR2 Spyder Owners Manual - Page 205

03 07.07 If you cannot shift the sequential manual transmission selector lever SB41067 SD04002 SD04003 3. Tighten the towing eyelet securely by a wheel nut wrench. CAUTION When installing the eyelet on the vehicle, be sure to tighten the eyelet securely. If the eyelet is loose, it may come off when being towed and result in death or serious injury. In case the selector lever lock is not released and the selector lever cannot be moved even though the ignition switch is turned to the "ON" position, follow the procedures below: 1. Turn the ignition key to the "LOCK" or "ACC" position. Make sure the parking brake is applied. 2. Pry up the cover with a flat- bladed screwdriver or equivalent. 3. To push the link, insert a key or screwdriver to the hole. The lever can be operated while the link is being pushed. 4. Shift into the "N" position. 5. Re- insert the cover. 6. Start the engine while depressing the brake pedal. Be sure to have the system checked by your Toyota dealer as soon as possible. 2003 MR2 from Aug. '03 Prod. (OM17511U) 227