2003 Toyota MR2 Spyder Owners Manual - Page 270

03 07.07 Checking and replacing fuses SB73035 Good Blown SB73037 Good Blown SB73066 Type A Type C If the headlights or other electrical components do not work, check the fuses. If any of the fuses are blown, they must be replaced. See "Fuse locations" on page 200 in Section 7-1 for locations of the fuses. SB73036 Good Blown Turn the ignition switch and inoperative component off. Pull a suspected fuse straight out and check it. Determine which fuse may be causing the problem. The lid of the fuse box shows the name of the circuit for each fuse. See page 243 in Section 8 of this manual for the functions controlled by each circuit. Type A fuses can be pulled out by the pull-out tool. The location of the pull-out tool is shown in the illustration. 2003 MR2 from Aug. '03 Prod. (OM17511U) Type B 224