2003 Toyota MR2 Spyder Owners Manual - Page 275

03 07.07 -Headlights (high beam) SB73044a SB73075a SB73077 2. Release the bulb retaining spring and remove the bulb. Install a new bulb and the bulb retaining spring. To install a bulb, align the tabs of the bulb with the cutouts of the mounting hole. 3. Install the rubber cover as shown and fit it securely on the boss. Plug in the connector. Make sure the rubber cover fits securely on the connector and the headlight body. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 1. Unplug the connector while depressing the lock release. If the connector is tight, wiggle it. 2003 MR2 from Aug. '03 Prod. (OM17511U) 229