2004 Toyota 4Runner Owners Manual - Page 28

'04 4Runner_U (L/O 0308) Power back window D Never leave anyone (particularly a small child) alone in your vehicle, especially with the ignition key still inserted. Otherwise, he/she could use the power window switches and get trapped in a window. Unattended person (particularly a small child) can be involved in a serious accident. If the battery is disconnected or run down, the power back window may not operate automatically and the jam protection function will not function correctly after you reconnect, replace or recharge the battery. In any of these cases, you should normalize the power back window with the power back window switch. To normalize the power back window: 1. Push the "Ɲ" (down) switch and lower the window halfway. 2. Push the "Ɯ" (up) switch until the window closes and hold the switch for a second. Make sure that the window opens and closes automatically. If the power back window cannot be operated properly, have it checked by your Toyota dealer. OPERATING FROM INSIDE The ignition key must be in the "ON" position. Normal operation: To open or close the back window, quickly push and release the " Ɲ" (down) or " Ɯ" (up) switch. The back window can be operated with the switch on the instrument panel or the key operation in the back door keyhole. You can open the back window when the back window wiper is working. At that time, the wiper stops working until the window is closed again. If the back window is not fully closed, the back window wiper, washer and defogger will not work. (See "Back window wiper and washer" on page 130 and "Back window and outside rear view mirror defoggers" on page 131 in Section 1- 5.) 28 2004 4RUNNER from Aug. '03 Prod. (OM35811U)