2004 Toyota 4Runner Owners Manual - Page 431

'04 4Runner_U (L/O 0409) -Wireless remote control (d) Unlocking linked with opening the driver's door All the side doors and back door are unlocked automatically when the driver's door is opened within 10 seconds after the ignition switch is turned from "ON" to the "ACC" or "LOCK" position. SETTING THE FUNCTIONS 1. Close all the side doors and back door. 2. Turn the ignition switch to the "ON" position. 3. Within 10 seconds after the ignition switch is turned to the "ON" position; D To set function (c) Push and hold the front of the power door lock switch for 5 seconds with the automatic transmission selector lever in any position except "P". D To set function (d) Push and hold the rear of the power door lock switch for 5 seconds with the automatic transmission selector lever in any position except "P". All the side doors and back door are automatically lock and unlock when you release the power door lock switch. This indicates that the function is set. If all the side doors and back door do not lock and unlock, the time the switch was held may have been too short or too long. Perform the procedure over again starting from step 1. If you want to cancel a function, repeat the procedure. Each time you perform the procedure, the function is set or cancelled. Locking operation D To set function (a) Push and hold the front of the power door lock switch for 5 seconds with the automatic transmission selector lever in the "P" position. D To set function (b) Push and hold the rear of the power door lock switch for 5 seconds with the automatic transmission selector lever in the "P" position. Unlocking operation 19 2004 4RUNNER from Sep. '04 Prod. (OM35847U)