2004 Toyota 4Runner Owners Manual - Page 574

'04 4Runner_U (L/O 0409) (b) Shifting procedure D The four- wheel drive control switch knob in the "L4" position and the automatic transmission selector lever in the "R" position (As for the automatic transmission selector lever positions, see "Automatic transmission (5- speed)" on page 151 in this Section.) SHIFTING BETWEEN "H4" (UNLOCKED) AND "H4" (LOCKED) To shift between unlock and lock modes in "H4", push the center differential lock switch. SHIFTING BETWEEN "L4" (UNLOCKED) AND "L4" (LOCKED) To shift between unlock and lock modes in "L4", push the center differential lock switch. SHIFTING BETWEEN "H4" AND "L4" To shift from "H4" to "L4", bring the vehicle to a complete stop with the brake pedal held down with your foot, shift the automatic transmission selector lever into "N" and push and turn the four- wheel drive control switch knob fully clockwise. To shift from "L4" to "H4", bring the vehicle to a complete stop with the brake pedal held down with your foot, shift the automatic transmission selector lever into "N" and turn the four- wheel drive control switch knob fully counterclockwise. If the "4LO" (low speed four- wheel drive) indicator light continues to blink when you operate the four- wheel drive control switch knob to the "H4" or "L4" position, drive forward or backward in a short distance, then stop the vehicle completely, shift the automatic transmission selector lever securely into "N" and operate the switch knob again. If the indicator continues to blink even if doing so, contact your Toyota dealer as soon as possible. There may be a trouble in the four- wheel drive system. CAUTION Never operate the four- wheel drive control switch knob if the wheels are slipping. Stop the slipping or spinning before operating. 162 2004 4RUNNER from Sep. '04 Prod. (OM35847U)