2004 Toyota 4Runner Owners Manual - Page 740

'04 4Runner_U (L/O 0409) -Raising your vehicle Front of vehicle When connecting the jack handle extension(s) and jack handle end, use the jack handle to tighten the square head bolt. Make sure that the bolt fits into the depression on the joint. When connecting the jack handle extension with the jack handle, tighten the round head bolt by hand. 6. After making sure that no one is in the vehicle, as the jack touches the vehicle and begins to fit, double- check that it is properly positioned. Rear side only- When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. 7. Raise the vehicle high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. To raise the vehicle, insert the jack handle end into the jack (it is a loose fit) and turn it clockwise with the handle. NOTICE Tighten the square head bolt securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. 328 2004 4RUNNER from Sep. '04 Prod. (OM35847U)