2004 Toyota 4Runner Navigation Manual - Page 10

4Runner_Navi_U (L/O 0308) Your navigation system CAUTION Take care not to jam your hand while the display is moving. Otherwise, you could be injured. Inputting letters and numbers The navigation system is operated by switches on the screen and the buttons located on the front face around the screen. When you touch a switch or push a button, a beep sounds. When using the switches on the touch screen, please use only light pressure with your finger to protect the screen from damage. Do not use objects other than your finger to touch the screen. L00004 NOTICE Do not obstruct the display while it is moving. It could damage your navigation system. You can adjust the angle of the display by pushing the "TILT" button. Each push of the "TILT" button will tilt the display to position 1, 2, 3 and then back to 0 in that order. If you turn the ignition switch off, the display will automatically move back to position 0. The display will automatically resume the previous position you used when the ignition switch is turned to the "ACC" or "ON" position. L00013 To type in an address etc., directly touch alphabet keys on the screen. If you touch a wrong letter, delete it using the switch. Touching the switch erases one letter. 2 2004 4RUNNER Navigation from Aug. '03 Prod. (OM35813U)