2004 Toyota Camry Owners Manual - Page 251

'04Camry_U (L/O 0307) -Lowering your vehicle CAUTION D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. D Have the wheel nuts tightened with torque wrench to 103 N·m (10.5 kgf·m, 76 ft·lbf), as soon as possible after changing wheels. Otherwise, the nuts may loosen and the wheels may fall off, which could cause a serious accident. -Reinstalling wheel ornament (steel wheels only) 9. Lower the vehicle completely and tighten the wheel nuts. Turn the jack handle counterclockwise to lower the vehicle. Use only the wheel nut wrench to tighten the nuts. Do not use other tools or any additional leverage other than your hands, such as a hammer, pipe or your foot. Make sure the wrench is securely engaged over the nut. Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. 10.Reinstall the wheel ornament. 1. Put the wheel ornament into position. Align the cutout of the wheel ornament with the valve stem as shown. 2. Press hard firmly on one side of wheel ornament and then firmly tap the other side around the edge of wheel ornament with the heel of your hand to snap into place. 251 2004 CAMRY from Jul. '03 Prod. (OM33616U)