2004 Toyota Highlander Owners Manual - Page 339

'04 HIGHLANDER_U (L/O 0308) -Reinstalling wheel ornament 10.Reinstall the wheel ornament. 1. Put the wheel ornament into position. 2. Then tap it firmly with the side or heel of your hand to snap it into place. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. Type A -After changing wheels 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 402 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 12.Restow all the tools, jack and flat tire securely. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 402 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. Initial adjustment of the tire pressure warning system is necessary after you have replaced your tires or wheels. See "Tire pressure warning system" on page 155 in Section 1 −7. 339 Type B 2004 HIGHLANDER from Aug. '03 Prod. (OM48478U)