2004 Toyota Land Cruiser Owners Manual - Page 21

Power windows 4. Install the lid with the 2 screws. 5. Install the module into the key frame and secure the cover with the screw. 6. When pushing any switch on the wireless key, make sure the indicator light comes on. 12C010a 12C011a NOTICE z Make sure the positive side and negative side of the battery are faced correctly. z Do not replace the battery with wet hands. Water may cause unexpected rust. z Do not touch or move any components inside of the transmitter, or it may interfere with proper operation. z Be careful not to bend the electrode of the battery insertion and that dust or oils do not adhere to the case. z Take care not to lose the screws. z Close the cover securely. The windows can be operated with the switch on each side door. The power windows work when the ignition switch is in the "ON" position. Key off operation: If both front doors are closed, they work for 45 seconds even after the ignition switch is turned off. They stop working when either front door is opened. OPERATING THE DRIVER'S WINDOW Use the switch on the driver's door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Lightly pull up the switch. Automatic operation: Push the switch completely down or pull it completely up, and then release it. The window will fully open or close. To stop the window partway, lightly move the switch in the opposite direction and then release it. Jam protection function: If something gets caught between the window and window frame during automatic closing operation or key off closing operation, the window stops and opens halfway. If the window receives a strong impact, this function may work even if nothing is caught. 21 2004 L/C100 from Aug '03 Prod. (OM60A04U)