2004 Toyota MR2 Spyder Owners Manual - Page 44

03 12.25 D Do not modify or remove any wiring. Do not modify, remove, strike or open any components such as the steering wheel pad, steering wheel, column cover, dashboard near the passenger airbag, passenger airbag cover, passenger airbag or airbag sensor assembly. Doing so may prevent the airbag system from activating correctly, cause sudden activation of the system or disable the system, which could result in death or serious injury. Failure to follow these instructions can result in death or serious injury. Consult your Toyota dealer about any repair and modification. NOTICE Do not perform any of the following changes without consulting your Toyota dealer. Such changes can interfere with proper operation of the SRS airbag system in some cases. z Installation of electronic devices such as a mobile two−way radio, cassette tape player or compact disc player z Modification of the suspension system z Modification of the front end structure z Attachment of a grille guard (bull bar, kangaroo bar, etc.), snowplow, winches or any other equipment to the front end z Repairs made on or near the front fenders, front end structure, console, steering column, steering wheel or dashboard near the passenger airbag This indicator comes on when the ignition key is turned to the "ON" position. It goes off after about 6 seconds. This means the SRS airbags are operating properly. This warning light system monitors the airbag sensor assembly, front airbag sensors, seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers" on page 77.) If any of the following conditions occurs, this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible. SB13102a 44 2004 MR2 from Feb. '04 Prod. (OM17518U)