2004 Toyota MR2 Spyder Owners Manual - Page 98

03 12.25 Cruise control The cruise control allows you to cruise the vehicle at a desired speed over 40 km/h (25 mph) even with your foot off the accelerator pedal. Your cruising speed can be maintained up or down grades within the limits of engine performance, although a slight speed change may occur when driving up or down the grades. On steeper hills, a greater speed change will occur so it is better to drive without the cruise control. SB16010 SB16011 CAUTION D To help maintain maximum control of your vehicle, do not use the cruise control when driving in heavy or varying traffic, or on slippery (rainy, icy or snow−covered) or winding roads. TURNING THE SYSTEM ON To operate the cruise control, press the "CRUISE ON−OFF" button. This turns the system on. The indicator light in the instrument panel shows that you can now set the vehicle at a desired cruising speed. Another press will turn the system completely off. SETTING AT A DESIRED SPEED On vehicles with sequential manual transmission, the gear position must be "5" or "6" before you set the cruise control speed. Bring your vehicle to the desired speed, push the lever down in the "SET/COAST" direction and release it. This sets the vehicle at that speed. If the speed is not satisfactory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. D Avoid vehicle speed increases when driving downhill. If the vehicle speed is too fast in relation to the cruise control set speed, cancel the cruise control then downshift the transmission to use engine braking to slow down. CAUTION To avoid accidental cruise control engagement, keep the "CRUISE ON− OFF" switch off when not using the cruise control. 98 2004 MR2 from Feb. '04 Prod. (OM17518U)