2004 Toyota Sienna Owners Manual - Page 141

04 SIENNA_U (L/O 0408) -Installation with child restraint lower anchorages (for third seats) 2. Turn up the covers for the lower anchorages. Confirm the position of the lower anchorages near the buttons or tags on the seatback. 3. Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. For owners in Canada-The symbol on a child restraint system indicates the presence of a lower connector system. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap (for second seats)" on page 135 in this Section.) For installation details, refer to the instruction manual equipped with each product. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D After securing the child restraint system, never slide or recline the seat. D Do not install a child restraint system on the second seat if it interferes with the lock mechanism of the front seats. This can cause death or serious injury to the child and front passenger in case of sudden braking or a collision. Lower anchorages for the child restraint systems complying with the FMVSS225 or CMVSS210.2 specifications are installed in the rear seat. The anchorages are installed in the clearance between the seat cushion and seatback of the right and center seats. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. 141 2004 SIENNA from Aug. '04 Prod. (OM45422U)