2004 Toyota Sienna Owners Manual - Page 143

04 SIENNA_U (L/O 0408) Tilt and telescopic steering wheel 2. Widen the clearance between the seat cushion and seatback a little and confirm the position of the lower anchorages. 3. Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. For owners in Canada-The symbol on a child restraint system indicates the presence of a lower connector system. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap (for third seats)" on page 137 in this Section.) For installation details, refer to the instruction manual equipped with each product. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D After securing the child restraint system, never recline the seat. D Do not put a child restraint system on the third seat if it interferes with the lock mechanism of the second seats. This can cause death or serious injury to the child and front passenger in case of sudden braking or a collision. To adjust the steering wheel position, push down the lock release lever. Then tilt the steering wheel to the desired angle, push or pull it to the desired steering column length and pull up the lock release lever. 143 2004 SIENNA from Aug. '04 Prod. (OM45422U)