2004 Toyota Sienna Owners Manual - Page 218

04 SIENNA_U (L/O 0408) BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. Type 1−2- BAS: Adjusts low−pitched tones. The display ranges from −5 to 5. MID: Adjusts mid−pitched tones. The display ranges from −5 to 5. TRE: Adjusts high−pitched tones. The display ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. SURROUND: Turn on or off the surround function. "SURROUND ON" or "SURROUND OFF" will appear on the display. DISC (Compact disc) Push the "DISC" button to play a compact disc. When the audio system is set into compact disc operation, the display shows the track, or track and disc number currently being played. Vehicles with rear seat entertainment system- The "DISC" button may also be used to operate a DVD player when a disc is loaded in the DVD player. Pressing the "DISC" button changes between the CD player and DVD player. When the DVD player is in operation, "AUX" appears on the display. Error messages If the player malfunctions, your audio system will display one of the six following error messages. "WAIT": The compact disc player unit may be too hot. Allow the player to cool down. "ERROR 1": The disc may be dirty, damaged or inserted incorrectly (up−side down). Clean the disc and re−insert it. "NO DISC": The compact disc changer of separate unit is empty. Insert a disc. "ERROR 3": There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. "ERROR 4": Over −current. Toyota dealer to inspect. Ask your "CD OPEN": The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer. Ɲ DISC Ɯ With compact disc changer only- Use these buttons to select the disc you want to listen to. Push "Ɲ" (preset button 3) or "Ɯ" (preset button 4) until the number of the disc you want to listen appears on the display. Dolbyr B NR∗ If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, " will push " " (preset button 3). " appear on the display. Push the button again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduction, play your tapes with this button on or off according to the mode used to record the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. ∗ 218 2004 SIENNA from Aug. '04 Prod. (OM45422U)