2004 Toyota Sienna Owners Manual - Page 695

Introduction & Operation SIENNA (QRG_U) J Operation Procedure F Acceleration/Deceleration To accelerate: Depress the accelerator pedal. (When you release the accelerator pedal, follow- up cruising or fixed speed cruising resumes.) If there was no vehicle ahead, the vehicle will accelerate gradually to the preset speed. At this time, depressing the accelerator pedal or pressing the control lever upward and releasing it will accelerate quickly. To decelerate: Depress the brake pedal. (Even when you release the brake pedal, dynamic laser cruise control does not return to follow- up cruising or fixed speed cruising. Press the control lever upward to resume follow- up- cruising or fixed speed cruising.) F Changing the preset speed Using the control lever: 1 Press the control lever upward or downward. D Press the control lever upward in the "+ RES" direction to increase the preset speed. D Press the control lever downward in the "- SET" direction to decrease the preset speed. The displayed speed will increase or decrease every 5 mph (for the U.S.A.) or 5 km/h (for Canada and Mexico). To increase the preset speed y16067q To decrease the preset speed 2 Release the control lever when the display shows the desired preset speed. Using the accelerator and brake pedals: 1 2 Depress the accelerator or brake pedal to attain the desired speed. Press the control lever downward in the "- SET" direction and release the lever. y16064q −7−