2004 Toyota Sienna Owners Manual - Page 76

04 SIENNA_U (L/O 0408) When you install the second seats, be sure to place it where the seat is originally positioned because each second seat is not interchangeable. You can distinguish the original seat position by the position of the front seat leg pin and the shape of the seat striker bezel in the floor. The right side second seat has a pin in the outside of the right front leg and the left side second seat has a pin in the outside of the left front leg as shown in the illustration. CAUTION You must install the seat in proper position to wear the seat belt properly. Failure to be properly restrained with the seat belt in an accident can cause death or serious injury. Refer to the label on the side of the seat for additional installation instructions. 1. Align the front leg hooks with the rear strikers in the floor. Then swing up the seat. 2. Make sure the front leg is locked securely, fold down the seat and engage the rear leg lock. NOTICE You must install the seat in its original position. If it is installed in the wrong position, the seat lock or bezel will be damaged. 76 2004 SIENNA from Aug. '04 Prod. (OM45422U)