2004 Toyota Tundra Owners Manual - Page 25

'04 TUNDRA_U (L/O 0309) Wireless remote control (double cab models) z Do not touch or move any components inside of the transmitter, or it may interfere with proper operation. z Be careful not to bend the electrode of the transmitter battery insertion and that dust or oils do not adhere to the transmitter case. z Close the transmitter case securely. After replacing the battery, check that the transmitter operates properly. If the transmitter still does not operate properly, contact your Toyota dealer. The wireless remote control system is designed to lock or unlock all the doors or activate the "PANIC" mode from a distance within approximately 1 m (3 ft.) of the vehicle. LOCKING DOORS AND UNLOCKING THE To lock and unlock all the doors, push the switches slowly and securely. To lock: Push the "LOCK" switch. All the doors are locked simultaneously. At this time one beep will be heard, and the parking lights and tail lights flash once. Check to see that all the doors are securely locked. If any of the doors is not securely closed, locking cannot be performed by the "LOCK" switch and a beep will sound continuously for 10 seconds. However, if the key is in the ignition, a beep will not sound. To stop the beep, close all the doors securely or push the "UNLOCK" switch. The beep can be disabled. For details, contact your Toyota dealer. Locking operation Unlocking operation 25 2004 TUNDRA from Sep. '03 Prod. (OM34426U)