2005 Toyota 4Runner Owners Manual - Page 114

'05 4Runner_U (L/O 0409) -Installation with child restraint lower anchorages (vehicles with third seats) CAUTION 5th lock position 1st lock position D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. Lower anchorages for the child restraint systems complying with the FMVSS225 or CMVSS210.2 specifications are installed in the second seats. The anchorages are installed in the seat cushion of the right side seating position and between the center and left side seating position. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. CHILD RESTRAINT INSTALLATION SYSTEM 1. Fold down the seatback. Make sure the rear seat legs are relocked into place (folding down the seatback will disengage them) by pushing downward on the back of the seat. Adjust the seatback to the 1st lock position (most upright position) and then to the 5th lock position. Make sure the locked securely. seat and seatback is 114 2005 4RUNNER from Sep. '04 Prod. (OM35843U)