2005 Toyota 4Runner Owners Manual - Page 341

'05 4Runner_U (L/O 0409) -Lowering your vehicle CAUTION D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. D Have the wheel nuts tightened with torque wrench to 110 N·m (11.5 kgf·m, 83 ft·lbf), as soon as possible after changing wheels. Otherwise, the nuts may loosen and the wheels may fall off, which could cause a serious accident. -Reinstalling wheel ornament 10.Lower the vehicle completely and tighten the wheel nuts. Turn the jack handle extension counterclockwise with handle to lower the vehicle. Use only the wheel nut wrench and turn it clockwise to tighten the nuts. Do not use other tools or any additional leverage other than your hands, such as a hammer, pipe or your foot. Make sure the wrench is securely engaged over the nut. Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. 11. Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 341 2005 4RUNNER from Sep. '04 Prod. (OM35843U)