2005 Toyota Corolla Owners Manual - Page 327

'05 Corolla_U (L/O 0409) Power windows D Mode 4-Automatic locking and unlocking linked with the shift position and ignition switch Locking function-All doors are automatically locked when the shift lever is moved out of the "P" position with the ignition switch in the "ON" position and all doors are closed. Unlocking function-All doors are automatically unlocked when the ignition switch is turned from the "ON" position to the "ACC" or "LOCK" position. CHANGING THE MODE The mode toggles through from mode 1 to mode 4. To change the mode, do the following: 1. Set the interior light control dial to the door position. (See "Interior/instrument panel light control" on page 95 in Section 1−5.) 2. Shift the shift lever into the "P" position and close all doors. 3. Turn the ignition switch to the "ON" position. 4. Within 5 seconds switch is turned to push and hold the switch on the front seconds. after the ignition the "ON" position, power door lock side for about 5 5. The interior light will flash to indicate that the mode has been changed. The flashing of the interior light indicates the mode which has been selected. D Flashing D Flashing once, the changed to mode 1. twice, the changed to mode 2. changed to mode 3. function function has has D Flashing three times, the function has D Flashing four times, the function has changed to mode 4. If the battery is disconnected or run down, the mode is changed into initial mode (mode 1). The windows can be operated with the switch on each door. The power windows work when the ignition switch is in the "ON" position. OPERATING THE DRIVER'S WINDOW Use the switch on the driver's door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Pull up the switch. 23 2005 COROLLA from Sep. '04 Prod. (OM12891U)