2005 Toyota Highlander Warranty, Maitenance, Services Guide - Page 40

Explanation of Maintenance Items Engine Valve Clearance Inspect for excessive lifter noise and engine vibration and adjust if necessary. A qualified technician should perform this operation. Exhaust Pipes and Mountings Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary. Fuel Lines and Connections, Fuel Tank Band and Fuel Tank Vapor Vent System Hoses Visually inspect for corrosion, damage, cracks and loose or leaking connections. Tighten connections or replace parts as necessary. Fuel Tank Cap Gasket Visually inspect for cracks, deterioration and damage and replace if necessary. Nuts and Bolts on Chassis and Body Re-tighten the seat-mounting bolts and front/rear suspension member retaining bolts to specified torque. Propeller Shaft Lubricate the propeller shaft spiders and slide yokes with lithium-base chassis grease and the double cardan joint with molybdenum-disulfide lithium-base chassis grease, and re-torque the bolt. Only a qualified technician should re-torque the bolt. Radiator Core and Condenser Inspect for debris and signs of damage. Have any problem repaired immediately by a qualified technician. Spark Plugs Replace at specified intervals. Install new plugs of the same type as originally equipped. A qualified technician should perform this operation. Steering Gear Box Inspect for signs of leakage. If you discover any leakage, have it repaired immediately by a qualified technician. 38