2005 Toyota MR2 Spyder Owners Manual - Page 17

04 09.01 CAUTION After inserting the support rod into the slot, make sure the rod supports the engine hood securely from falling down on to your head or body. SB12044a SB12038a NOTICE Be sure to return the support rod to its clip before closing the engine hood. Closing the engine hood with the support rod up could cause the engine hood to bend. 2. In rear of the vehicle, lift the engine hood. 3. Hold the engine hood open by inserting the support rod into the slot. To insert the support rod into the slot, move it straight up. If it is moved to the side or toward the inside of the vehicle, it may become detached. Before closing the engine hood, check to see that you have not forgotten any tools, rags, etc. and return the support rod to its clip-this prevents rattles. Then lower the engine hood and make sure it locks into place. If necessary, press down gently on the rear edge to lock it. CAUTION Be careful not to touch the engine hood, the support rod, or surrounding area which could be hot after driving, to prevent burning yourself. 2005 MR2 from Aug. '04Prod. (OM17527U) 17