2005 Toyota MR2 Spyder Owners Manual - Page 35

04 09.01 -Seat belt pretensioners CAUTION D After inserting the tab, make sure the tab and buckle are locked and that the lap and shoulder portions of the belt and the seat belt extender are not twisted. SB13089a SB13091a D Do not insert coins, clips, etc. in the buckle as this may prevent you from properly latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from injury. The driver and passenger seat belt pretensioners are designed to be activated in response to a severe frontal impact. When the sensor detects a severe frontal impact, the seat belts are quickly drawn back by the retractors so that the belts snugly restrain the occupants. The seat belt pretensioners are activated even if there is no passenger in the seat. The seat belt pretensioners and SRS airbags may not operate together in all collisions. The seat belt pretensioner system consists mainly of the following components and their locations are shown in the illustration. 1. Front airbag sensor 2. Seat belt pretensioner assemblies 3. Airbag sensor assembly 4. SRS warning light The seat belt pretensioners are controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and airbag sensor. 2005 MR2 from Aug. '04Prod. (OM17527U) 35