2005 Toyota MR2 Spyder Owners Manual - Page 59

04 09.01 -Installation with child restraint lower anchorages CAUTION D Do not slide the seat after securing the child restraint system. SB13113 D Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. SB13116 2. Fix the child restraint system with the seat belt. Latch the hook onto the anchor bracket and tighten the top strap. For instructions to install the child restraint system, see "-Types of child restraint system" on page 48. Store a removed cover in a safe place such as the glove box. Be sure to replace a cover when the anchor bracket is not in use. The lower anchorages for the child restraint system interfaced with the FMVSS225 specification are installed in the passenger seat. The anchorages are installed in the gap between the seat cushion and seatback of passenger seat. Child restraint system interfaced with the FMVSS213 specification can be fixed with these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. 2005 MR2 from Aug. '04Prod. (OM17527U) 59