2005 Toyota MR2 Spyder Owners Manual - Page 95

04 09.01 D The selector lever is shifted from the "N" position to the "S" or "R" position soon after starting the engine. In this case, shift the selector lever to the "N" position once, and after a few seconds, shift the selector lever again to the "S" or "R" position. In this case, turn the ignition "ON" before operate the shift lever. Shift the selector lever to the "N" position once, then shift the selector lever again to the "S" or "R" position. "N" indicator flashing and warning buzzer (long pulse sound) beeping. D When the selector lever is shifted to the "S" position while starting the engine, the selector lever position and the gear position do not match. In this case, shift the selector lever to the "N" position once and confirm that the engine has started. Then, shift the selector lever to the "S" or "R" position. D The system is re−trying shift operation from the "N" to "S" or "R" position due to shift failure. SD16022 D Stopping for more than 90 seconds without depressing the brake pedal, while the engine is running with the selector lever in the "S" position. "1st" indicator blinking D 10 seconds after the driver's door is opened with the selector lever in the "S" position while the engine is running. D At the same time when turning the ignition switch to the "ON" position and shifting the selector lever from the "N" position to the "S" or "R" position. In this case, shift the selector lever to the "N" position once, then shift the selector lever again to the "S" or "R" position. D At the same time when turning the ignition switch to the "ON" position and shifting the selector lever from the "S" position to the "N" or "R" position. D Turn the ignition switch to the "OFF" position and shift the selector lever from the "N" to "S" position at the same time. If this condition lasts for a long time, shift the selector lever to the "N" position once and shift the selector lever again to the "S" or "R" position. D At the same time when turning the ignition switch to the "OFF" position and shifting the selector lever from the "S" to "N" position. In this case, shift the selector lever to the "S" position once, then shift the selector lever again to the "N" position. D At the same time when turning the ignition switch to the "OFF" position and shifting the selector lever from the "N" to the "S" or "R" position. 2005 MR2 from Aug. '04Prod. (OM17527U) 95