2005 Toyota Matrix Owners Manual - Page 85

'05 MATRIX_U (L/O 0409) For owners in Canada The symbol on a child restraint system indicates the presence of a lower connector system. CHILD RESTRAINT INSTALLATION Type A- 1. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages near the button on the seatback. 2. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B- 1. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages near the button on the seatback. 2. Latch the buckles onto the anchorages. Canada only Type B For installation details, refer to the instruction manual equipped with each product. CAUTION SYSTEM D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 82 in this Section.) 85 2005 MATRIX from Sep. '04 Prod. (OM12892U)