2005 Toyota Prius Owners Manual - Page 56

The indicator light will come on when all the doors and hood are closed and locked. The system will automatically be set after 30 seconds. When the system is set, the indicator light will start flashing again. 4. After making sure the indicator light starts flashing, you may leave the vehicle. Never leave anyone in the vehicle when you set the system, because unlocking from the inside will activate the system. SETTING THE SYSTEM When the key is inserted into the key slot: 1. Remove the key. In case of the smart entry and start system: 1. Stop the hybrid system and open the driver's door The indicator light will start flashing. (See "Hybrid vehicle immobilizer system" on page 21 for details.) 2. Have all passengers get out of the vehicle. 3. Close and lock all the doors and hood. WHEN THE SYSTEM IS SET Activating the system The system will sound the alarm under the following conditions: If any of the doors are unlocked without the mechanical key, wireless remote control transmitter or smart function and the key is not in the key slot, all the doors will be automatically locked again. After 1 minute, the alarm will automatically stop and the indicator light will starts flashing again. Reactivating the alarm Once set, the system automatically resets the alarm after the alarm stops. The alarm will activate again under the same circumstances described in "Activating the system". Stopping the alarm The alarm will be stopped by the following two ways: 21p007b D If any of the doors is unlocked or if the hood is forcibly opened without the mechanical key, wireless remote control transmitter or smart function. D Turn the hybrid system to "IG−ON". D Unlock any of the doors with the mechanical key, wireless remote control transmitter or smart function. If the auxiliary battery becomes discharged due to the vehicle being unused for a long time, etc., when the battery is recharged or replaced, the system will sound the alarm. If this happens, immediately stop the alarm. D If the battery terminal is disconnected and then reconnected. The indicator light will come on when the system is activated. 46