2005 Toyota Sequoia Navigation Manual
2005 Toyota Sequoia Manual
2005 Toyota Sequoia manual content summary:
- 2005 Toyota Sequoia | Navigation Manual - Page 1
switch operation ...2 Inputting letters and numbers ...3 Current position display ...5 Screen scroll operation (one-touch scroll) ...5 Map scale ...9 Orientation of the map ...9 Limitations of the navigation system ...10 Map database information and updates ...12 1 - 2005 Toyota Sequoia | Navigation Manual - Page 2
Touch switch operation This system is operated mainly by the switches on the screen. To prevent damage to the screen, lightly touch switches on the and moving images may be slightly distorted when the display is cold. D Under extremely cold conditions, the map may not be displayed and the data - 2005 Toyota Sequoia | Navigation Manual - Page 3
BASIC FUNCTIONS Inputting letters and numbers When searching for an address or a name, or entering a memo, you can input letters and numbers via the touch screen. D To input letters To display the alphabet keys, touch the D To input numerals and symbols To display the number keys and symbol keys, - 2005 Toyota Sequoia | Navigation Manual - Page 4
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen - 2005 Toyota Sequoia | Navigation Manual - Page 5
any point on the map and that point moves to the center of the screen and is shown by the cursor mark. INFORMATION D After the battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is - 2005 Toyota Sequoia | Navigation Manual - Page 6
, the current vehicle position mark returns to the center of the screen and the map moves as you the "Enter " switch. The screen changes and displays the map location of the selected destination, touch the "Add to " switch or the "Replace " switch. When there is already a preset destination, using - 2005 Toyota Sequoia | Navigation Manual - Page 7
the "Info." switch. The registered point is shown by on the map. To change the icon or name, etc., see page 68. You can register up to If there is already a preset destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add - 2005 Toyota Sequoia | Navigation Manual - Page 8
icon, the name and "Info." switch are displayed on the top of screen. If there is already a set destination, the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional destination, will set the new one as - 2005 Toyota Sequoia | Navigation Manual - Page 9
ranges 150 feet (50 m) to 250 miles (400 km). or switch until the Touch the scale bar changes normally. If you continue to touch on the switch, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving - 2005 Toyota Sequoia | Navigation Manual - Page 10
can change the red arrow indicates North. Limitations of the navigation system This navigation system calculates the current vehicle position using satellite signals, trucks, or even the placement of objects on the instrument panel may obstruct the GPS signals. The installation of window tinting - 2005 Toyota Sequoia | Navigation Manual - Page 11
road. When freeway and surface streets run in parallel. After moving by ferry or vehicle carrier. When a long route is searched during high speed driving. When driving without setting the current position calibration correctly. After repeating a change of direction by going forward and backward - 2005 Toyota Sequoia | Navigation Manual - Page 12
may not be complete or may not be the latest version. After replacing the tire, implement the operation described in the "D Tire change calibration". (For details, see page 78.) This navigation system uses the tire turning data and is designed to work with factoryspecified tires for your vehicle - 2005 Toyota Sequoia | Navigation Manual - Page 13
of the DATABASE, nor reproduce, copy, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which it was created, provided that you do not retain any copy of - 2005 Toyota Sequoia | Navigation Manual - Page 14
the passage of time, changing circumstances, and due to the emergency assistance; construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided - 2005 Toyota Sequoia | Navigation Manual - Page 15
Only. You agree to use this information for solely personal, non-commercial purposes, and not for service bureau, time-sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble - 2005 Toyota Sequoia | Navigation Manual - Page 16
available for route guidance. In one type of area, primarily around metropolitan centers, detailed route guidance is available for the entire area. In the other type of roads, streets, facilities, and their locations are often changed. In some places, construction on roads may be in progress. For - 2005 Toyota Sequoia | Navigation Manual - Page 17
" switch. Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. The map database is normally updated once a year. Contact your dealer for information about the availability and pricing of an update. 2. Touch the "Map DVD" switch. Make - 2005 Toyota Sequoia | Navigation Manual - Page 18
, push the "OPEN" button. After replacing map disc, push the button again to close the display. CAUTION D Do not place anything on the opened display, as such items may be thrown about in the compartment and possibly injure people in the vehicle during sudden braking or in an accident. D To reduce - 2005 Toyota Sequoia | Navigation Manual - Page 19
...Destination input by "Address" ...Destination input by "POI Name" ...Destination input by "POI Category" ...Destination input by "Emergency" ...Destination input by "Memory" ...Destination input by "Previous" ...Destination input by "Map" ...Destination input by "Intersection" ...Destination - 2005 Toyota Sequoia | Navigation Manual - Page 20
the search area. - Selecting the search area The "Destination" screen allows you to select the area to search for your destination. Touch the "Change" switch on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. See page 12 for map database information - 2005 Toyota Sequoia | Navigation Manual - Page 21
DESTINATION INPUT AND ROUTE GUIDANCE U.S.A. Switch "US1" "US2" States included in the search area Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky - 2005 Toyota Sequoia | Navigation Manual - Page 22
" for the memory point. (To register the "Home", see page 70.) Touch any of the quick access switches on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See " - Entering destination" on page 38.) To use this function - 2005 Toyota Sequoia | Navigation Manual - Page 23
"Street" switch to display the screen for inputting a street name. When you find your desired street name, touch the corresponding switch. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If the same - 2005 Toyota Sequoia | Navigation Manual - Page 24
your desired city. "Input Name": To narrow down the listed items by inputting the city name. If you input a street name first, the screen changes. You can then input the house number. To search by city, the following three methods are possible. 1. Selecting from the last 5 cities 2. Selecting from - 2005 Toyota Sequoia | Navigation Manual - Page 25
switch of the desired city name. If you have not used the navigation yet, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See page 23.) Input a city name. Touch the switch of the desired city name from - 2005 Toyota Sequoia | Navigation Manual - Page 26
a house number or a street name. (See page 23.) Input the name of Point of Interest. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If you input the name - 2005 Toyota Sequoia | Navigation Manual - Page 27
DESTINATION INPUT AND ROUTE GUIDANCE (a) Selecting a city to search Touch the "City" switch. SELECTING FROM THE LAST 5 CITIES Touch the switch of the desired destination. "Dist. Sort": In the order of distance from your current position. The distance from your current position up to the - 2005 Toyota Sequoia | Navigation Manual - Page 28
DESTINATION INPUT AND ROUTE GUIDANCE SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name from the displayed list. Input the city name. Touch the switch of the desired city - 2005 Toyota Sequoia | Navigation Manual - Page 29
DESTINATION INPUT AND ROUTE GUIDANCE (b) Selecting from the categories Touch the - Destination input by "POI Category" The destination can be set by selecting the POI category and the search point. Touch the "POI Category" switch on the "Destination" screen. "Category" switch. When you touch the - 2005 Toyota Sequoia | Navigation Manual - Page 30
the category displayed by the icon, touch the "List" switch. To set search points, the following four methods are possible. 1. Inputting city center 2. Setting the current position as the search point 3. Setting the search point via the map screen 4. Setting the search point from the destinations - 2005 Toyota Sequoia | Navigation Manual - Page 31
DESTINATION INPUT AND ROUTE GUIDANCE SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch the "Current Position" switch. SETTING THE SEARCH POINT VIA THE MAP SCREEN Touch the "Map" switch. When you touch an arrow facing the desired point, the map scrolls in that direction. When you release your - 2005 Toyota Sequoia | Navigation Manual - Page 32
a list You can select the desired destination from the listed POI names. - Destination input by "Emergency" By touching the "Emergency" switch on the "Destination" screen, the display changes to a screen to select dealers, hospitals or police stations. During driving, only nearby police stations - 2005 Toyota Sequoia | Navigation Manual - Page 33
memory points. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination and the route memory points by the registered attribute. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2005 Toyota Sequoia | Navigation Manual - Page 34
starting point and up to 99 previously set destinations are displayed on the screen. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) "Date": To list the - 2005 Toyota Sequoia | Navigation Manual - Page 35
which are located near the destination to be set. Touch the switch of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If the same two - 2005 Toyota Sequoia | Navigation Manual - Page 36
(I-405). US highways use the state designation before the number (CA-1 18). Touch the switch of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) "Dist. Sort": In the - 2005 Toyota Sequoia | Navigation Manual - Page 37
and the longitude. When the input is finished, touch the "OK" switch. When you touch the switch of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) Input a telephone number. After - 2005 Toyota Sequoia | Navigation Manual - Page 38
and the route preference. "Replace ": To delete the existing destinations and set a new one. "Change": To change the route preference. (See " switch and the "Replace " switch are displayed. "Add to ": To add a destination. SCREEN B 3. To start guidance, touch the "Guide" switch. "3 Routes": - 2005 Toyota Sequoia | Navigation Manual - Page 39
starting guidance ROUTE PREFERENCE You can change route preference by touching the "Change" switch on SCREEN A. INFORMATION D indicator on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is dimmed as much as possible. After choosing conditions - 2005 Toyota Sequoia | Navigation Manual - Page 40
bottom of the screen. In some areas, the roads have not been completely digitized in our database yet. For this reason, the route guidance may guide the road that is not allowed to pass. The voice guidance provides various messages as you approach an intersection, or other point where you need - 2005 Toyota Sequoia | Navigation Manual - Page 41
On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than - 2005 Toyota Sequoia | Navigation Manual - Page 42
INPUT AND ROUTE GUIDANCE INFORMATION D If the system cannot determine the current vehicle position correctly (in (a) Adding destinations You can add destinations and search again for the routes. The system announces your approach to the final destination. 1 2 "Your destination is ahead." - 2005 Toyota Sequoia | Navigation Manual - Page 43
Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch the "Route" switch When you finish selecting the destinations, touch the "OK" switch. The system searches for the guidance route again, and displays the entire route. Even - 2005 Toyota Sequoia | Navigation Manual - Page 44
"No" switch, the previous screen will return. 5. If more than one destination is set, touch the "OK" switch after deleting the destinations. The system searches for the guidance route again, and displays the entire route. Setting and deleting route (a) Adding preferred road You can add points you - 2005 Toyota Sequoia | Navigation Manual - Page 45
DESTINATION INPUT AND ROUTE GUIDANCE (b) Deleting preferred road You can delete a set preferred road. 1. Touch the "Route" switch. 3. Select the preferred road which you wish to modify and touch the "Enter z" switch. 4. A message appears to confirm your request. To add the preferred road, touch - 2005 Toyota Sequoia | Navigation Manual - Page 46
is set, touch the "OK" switch after deleting the preferred road. The system searches for the guidance route again, and displays entire route. (c) Search condition to the destination is displayed. "Guide": To start guidance. "Route": To add or change a route. (For details, see pages 42 and 44.) - 2005 Toyota Sequoia | Navigation Manual - Page 47
GUIDANCE (d) Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where a delay new route to the destination. This picture shows an example of how the system would guide you around a delay caused by a traffic jam. 1 This position - 2005 Toyota Sequoia | Navigation Manual - Page 48
from the adjacent road. (ex. When the route guidance guides the route on the freeway, but you drive on the switch. When searching for a route, the system avoids routes where the indicator is dimmed as much Touch the "Route Preference" switch to change the conditions which are to determine the route - 2005 Toyota Sequoia | Navigation Manual - Page 49
" switch to display a particular type of Point of Interest on the screen. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 90.) When you touch the desired Point of Interest category, symbols will appear on the map screen indicating where - 2005 Toyota Sequoia | Navigation Manual - Page 50
this switch. Then choose one of the categories. The system will list the points within 20 miles (30 km). . The map will shift so that the icon is centered on the screen and overlaps with the cursor . At the "Enter " switch. The screen changes and displays the map location of the selected destination and - 2005 Toyota Sequoia | Navigation Manual - Page 51
from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (For details, see pages 42 and list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on - 2005 Toyota Sequoia | Navigation Manual - Page 52
DESTINATION INPUT AND ROUTE GUIDANCE Touch the "Map" switch of your desired point. The point which you choose is displayed on the map screen. Route preview : To indicate the next destination. 1. Touch the "Map View" switch. : To preview the route to the next destination. : To preview the route - 2005 Toyota Sequoia | Navigation Manual - Page 53
DESTINATION INPUT AND ROUTE GUIDANCE Screen configuration You can choose any one of the screen configurations. Depending on the conditions, it may not be possible to select certain screen configuration switches. : To display single map screen. (See page 53.) : To display dual map screen. (See page - 2005 Toyota Sequoia | Navigation Manual - Page 54
right side map by touching any specific point on the right side map. This screen can perform the following procedures. D Changing the map scale D Displaying the POI icon D Changing the orientation of the map Touch the "OK" switch when you complete editing. The screen returns to the dual map screen - 2005 Toyota Sequoia | Navigation Manual - Page 55
DESTINATION INPUT AND ROUTE GUIDANCE (d) Turn list screen (e) Arrow screen (f) Freeway information screen The screen shows the turn list. You cannot scroll through the list of roads. The screen shows the current road name and the distance to the next corner. This screen displays the distance - 2005 Toyota Sequoia | Navigation Manual - Page 56
DESTINATION INPUT AND ROUTE GUIDANCE INFORMATION When you drive on a freeway, the screen is automatically divided into two parts, with freeway information screen on the right side. (g) Intersection guidance screen/guidance screen on freeway D Intersection guidance screen This screen automatically - 2005 Toyota Sequoia | Navigation Manual - Page 57
When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time is calculated based on the set vehicle speed information. (For details, see page 79.) However, when the vehicle is not on the guidance route, the distance is the linear distance between the - 2005 Toyota Sequoia | Navigation Manual - Page 58
down to 150 feet (50 m). INFORMATION D If the map or the current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to - 2005 Toyota Sequoia | Navigation Manual - Page 59
DESTINATION INPUT AND ROUTE GUIDANCE 2. Using an eight-direction arrow, move the cursor to the position of the building you wish to display information. 3. Touch the "Building Info." switch. 4. Details of POIs in some buildings may be displayed. If you wish to see detailed POI information, touch - 2005 Toyota Sequoia | Navigation Manual - Page 60
DESTINATION INPUT AND ROUTE GUIDANCE 60 - 2005 Toyota Sequoia | Navigation Manual - Page 61
modes ...Notifying traffic restriction ...Intersection guidance ...Guidance screen on freeway ...Street name on scroll map ...Display of building shape ...Function) ...Screen layout function ( POI category change (Show POI Icons) ...Delete previous point ...Map color ...Screen animation ... 61 - 2005 Toyota Sequoia | Navigation Manual - Page 62
" screen and touch the "Suspend Guidance" switch. INFORMATION When you do not have route guidance, the "Suspend Guidance" switch cannot be used. The screen will change to the current position map with route guidance. 62 - 2005 Toyota Sequoia | Navigation Manual - Page 63
even if the navigation screen is changed to other screens. "Adaptive Volume Control": If you turn the "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the switch. The indicator - 2005 Toyota Sequoia | Navigation Manual - Page 64
"Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. When you touch the switch already registered, this screen appears. To replace, touch the "Yes" switch. To cancel the replacement, touch the "No" or "Back" switch. 64 - 2005 Toyota Sequoia | Navigation Manual - Page 65
user D To delete user Push the "MENU" button to display the "Menu" screen. Then touch the "Select User" switch. Touch the "User wish to change. number" switch you Touch the "Delete" switch of "User number" you wish to delete. The above message appears, then the map screen will be displayed - 2005 Toyota Sequoia | Navigation Manual - Page 66
ADVANCED FUNCTIONS My places You can register and keep your own memory points (like restaurants, sports facilities, etc.) and use the memory points to input a destination. (a) Registering memory points The confirmation screen appears. To delete, touch the "Yes" switch. To return to the previous - 2005 Toyota Sequoia | Navigation Manual - Page 67
ADVANCED FUNCTIONS 2. Touch the "Register" switch of the "Memory Points". A screen similar to the destination input screen appears. Input the desired point in the same way as inputting a destination. (See page 20.) When you finish memory point registration, the memory point data screen will appear - 2005 Toyota Sequoia | Navigation Manual - Page 68
ADVANCED FUNCTIONS (b) Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 2. Touch the "Edit" switch of the "Memory Points". The - 2005 Toyota Sequoia | Navigation Manual - Page 69
ADVANCED FUNCTIONS D To change "Icon" Touch the desired icon. You can turn the page by touching "Page 1", "Page 2" or "With Sound" switch. "With Sound": To display sound icons. When - 2005 Toyota Sequoia | Navigation Manual - Page 70
ADVANCED FUNCTIONS D To change "Attribute" For easy destination input, set the attribute of the memory points as Home or Quick access 1 to 5. To replace the attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the desired attribute. It is - 2005 Toyota Sequoia | Navigation Manual - Page 71
ADVANCED FUNCTIONS D To change "Name" D To change "Location" To delete an attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the alphabet and/ - 2005 Toyota Sequoia | Navigation Manual - Page 72
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) (c) Deleting memory points 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. Touch numeral keys. When - 2005 Toyota Sequoia | Navigation Manual - Page 73
the "Register" switch of the "Areas to avoid". 3. Set the cursor in the center of the area to avoid, and touch the "Enter" switch. 2. Enter the inputted in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to avoid - 2005 Toyota Sequoia | Navigation Manual - Page 74
area to avoid 1. Touch the "Edit" switch of the "Areas to Avoid" to display the "Edit Area to Avoid" screen. 4. Touch either or switch to change the size of the area to avoid. 3. Touch the "Name" , "Location" or "Area Size" switch on this screen. 2. To edit an area to avoid, touch - 2005 Toyota Sequoia | Navigation Manual - Page 75
"Off" switch. Set the cursor to the desired location, then touch the "Enter" switch. The previous screen will be displayed. Touch either or switch to change the size of area you want to avoid, and touch the "OK" switch. The previous screen will be displayed. 75 - 2005 Toyota Sequoia | Navigation Manual - Page 76
to delete from the list. "Delete all": To delete all registered areas to avoid in the system. 3. To delete, touch the "Yes" switch. To cancel the deletion, touch the "No" manually. "Distance": You can select "km" or "miles" as the distance unit. "Estimated Travel Time": You can set the system to - 2005 Toyota Sequoia | Navigation Manual - Page 77
color. "Screen Animation": You can set some screen displays to be animated. Current position calibration When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually the navigation system" on page 10. 77 - 2005 Toyota Sequoia | Navigation Manual - Page 78
current vehicle position mark. Touch the "Enter" switch and the map screen will be displayed. D Tire change calibration The tire change calibration function will be used when replacing the tires. This function will adjust the mis-calculation caused by the circumference difference between the old - 2005 Toyota Sequoia | Navigation Manual - Page 79
ADVANCED FUNCTIONS Distance unit 1. Push the "MENU" button. Estimated travel time You can set the speed that is used for the calculation of the estimated travel time. 2. Touch the "Setup" switch. 3. Touch the "km" or "miles" switch of "Distance" to choose - 2005 Toyota Sequoia | Navigation Manual - Page 80
ADVANCED FUNCTIONS INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on the speeds you selected and your actual position along the guidance route. D The time shown on the screen may vary greatly depending on your progress along the - 2005 Toyota Sequoia | Navigation Manual - Page 81
ADVANCED FUNCTIONS Auto reroute When the "Auto Reroute" feature is turned on, the system will automatically search for a new route to the destination if you strays from the guidance route. This feature does not operate while you are driving on roads where guidance is not available. To turn the " - 2005 Toyota Sequoia | Navigation Manual - Page 82
can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if you push the "MAP/ VOICE" button. To turn the "Auto Voice Guidance" mode on: 1. Push the "MENU" button. 3. Touch the "Change" switch. The "Adjust Time Zone" screen appears on - 2005 Toyota Sequoia | Navigation Manual - Page 83
is turned on, you can hear the voice guidance in all modes. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when you using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto - 2005 Toyota Sequoia | Navigation Manual - Page 84
ADVANCED FUNCTIONS Notifying traffic restriction When the "Notify Traffic Restriction" feature is turned on, the system notifies you of traffic or seasonal restriction. 3. Touch the "On" switch of "Voice Guidance in All Modes" and touch the "OK" switch. To turn the " - 2005 Toyota Sequoia | Navigation Manual - Page 85
ADVANCED FUNCTIONS Intersection guidance When the "Intersection Guidance" feature is turned on, the system will display the intersection guidance screen if you drive with route guidance. 3. Touch the "On" switch of "Notify Traffic Restriction" and touch the "OK" switch. 2. - 2005 Toyota Sequoia | Navigation Manual - Page 86
ADVANCED FUNCTIONS Guidance screen on freeway When the "Guidance Screen on Freeway" feature is turned on, the system will display the lane guidance screen if you drive on a freeway with route guidance. 3. Touch the "On" switch of "Intersection Guidance" and touch the "OK" - 2005 Toyota Sequoia | Navigation Manual - Page 87
ADVANCED FUNCTIONS Street name on scroll map When the "Street Name on Scroll Map" feature is turned on, the system will display the name of a street where the cursor is positioned on the scroll map. 3. Touch the "On" switch of "Guidance Screen on Freeway" and - 2005 Toyota Sequoia | Navigation Manual - Page 88
ADVANCED FUNCTIONS Display of building shape When the "Display Building Shape" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). 3. Touch the "On" switch of "Street - 2005 Toyota Sequoia | Navigation Manual - Page 89
name on the map screen. 1. Push the "MENU" button. 3. Touch the "On" switch of "Display Building Shape" and touch the "OK" switch. 3. Touch the "Change" switch of the " Function". 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 4. Touch the switch - 2005 Toyota Sequoia | Navigation Manual - Page 90
ADVANCED FUNCTIONS POI category change (Show POI Icons) You can choose 6 icons displayed on the "Show POI . Then switch twice to display page 3 of touch the "Setup" screen. 3. Touch the "Change" switch of "Show POI Icons". 1. Push the "MENU" button. 4. Touch the category switch you wish to - 2005 Toyota Sequoia | Navigation Manual - Page 91
ADVANCED FUNCTIONS Delete previous point You can delete your previous destination. 1. Push the "MENU" button. 5. Touch the switch corresponding to the desired category. Then touch the "OK" switch. 2. Touch the "Setup" switch. Then touch switch twice to display page 3 of the "Setup" screen. 3. - 2005 Toyota Sequoia | Navigation Manual - Page 92
ADVANCED FUNCTIONS Map color 1. Push the "MENU" button. 4. Touch the switch you want to delete. For efficient previous point search, previous points can be sorted by the "Date" or " - 2005 Toyota Sequoia | Navigation Manual - Page 93
to return the map screen. Touch the "Normal" switch to return to the default map color. Screen animation When the "Screen Animation" feature is turned on, some switches and screens become animated. (e.g.: change map guidance on the map screen) To turn the "Screen Animation" mode on: 1. Push the - 2005 Toyota Sequoia | Navigation Manual - Page 94
ADVANCED FUNCTIONS 94 - 2005 Toyota Sequoia | Navigation Manual - Page 95
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions IV Maintenance information ...96 Calendar with memo ...101 Screen adjustment ...108 Screen setting ...110 95 - 2005 Toyota Sequoia | Navigation Manual - Page 96
OTHER FUNCTIONS Maintenance information This system informs you when to replace certain parts or components and shows dealer information (if registered) on the screen. (See "Information items" on page 97.) When the navigation system begins operating after either the information item's date comes - 2005 Toyota Sequoia | Navigation Manual - Page 97
top of the "Maintenance" screen to turn off the information screen. When your vehicle needs to be serviced, the icon color will change to orange. Information items Oil change Replace oil filter INFORMATION Notice of "Date": You can input the next maintenance date. Notice of "Distance": You can - 2005 Toyota Sequoia | Navigation Manual - Page 98
Replace engine coolant You can register the dealer name, staff, location and phone number. Replace brake fluid Replace ATF 2. Enter the location of the dealer in the same way as for destination input. (See page 20.) 1. Touch the "Set Dealer" switch on the "Maintenance" screen. Replace air filter - 2005 Toyota Sequoia | Navigation Manual - Page 99
and displays the map location of the dealer. If it is OK, touch the "Enter" switch. The screen changes to "Edit Dealer" screen. (See "(b) Edit dealer".) You can edit the dealer name, staff, location and phone number. 1. Touch the "Set Dealer" switch on the " - 2005 Toyota Sequoia | Navigation Manual - Page 100
OTHER FUNCTIONS D To edit "Dealer" or "Contact" D To edit "Location" D To edit "Phone #" (telephone number) To input the name, touch the alphabet, numeral and/or umlaut keys. You can input up to 24 letters. After inputting, touch the "OK" switch at the bottom right of the screen. The previous - 2005 Toyota Sequoia | Navigation Manual - Page 101
"Back" switch. Touch the "Enter " switch on "Set Dealer" screen. The screen changes and displays the map location of the registered dealer and the "Route Preference". (See " - Entering destination" on page 38.) This system informs you of the memo entry. At the specified date, the memo information - 2005 Toyota Sequoia | Navigation Manual - Page 102
OTHER FUNCTIONS (a) Inputting a memo To display the "Information Menu" screen, push the "INFO" button. Then touch the "Calendar" switch. The current date is circled in yellow. If the current date is not displayed on the screen, touch the "Today" switch to display the current month calendar. 1. - 2005 Toyota Sequoia | Navigation Manual - Page 103
OTHER FUNCTIONS D Memo D Location Touch the "Memo" switch to enter text. Enter text using the keys. You can enter text up to 24 letters. After entering the text, touch the "OK" switch at the bottom right of the screen. Touch the "Location" switch to set location. A screen similar to the - 2005 Toyota Sequoia | Navigation Manual - Page 104
OTHER FUNCTIONS D Mark color D Date color The date inputted is marked as shown above. You can choose the desired mark and/or date color. Touch the "Mark" switch. Touch the "Date" switch. Touch your desired color for the mark. 104 - 2005 Toyota Sequoia | Navigation Manual - Page 105
mark and/or date for the date you added the memo and/or location. To default the date color, touch the "Delete" switch on the screen. After you choose the date and/or mark color, touch the "OK" switch to display the previous screen. To add a memo, touch the corresponding date. The - 2005 Toyota Sequoia | Navigation Manual - Page 106
OTHER FUNCTIONS (d) Editing a memo (e) Memo list To edit the memo, touch the corresponding date, and then touch the memo you wish to edit. Touch the switch. "Memo" or "Location" 1. To list the memos you added, touch the "List" switch. 106 - 2005 Toyota Sequoia | Navigation Manual - Page 107
OTHER FUNCTIONS 2. Touch the desired search condition to list the memos. The "Memo list" is displayed on the screen. To display the memos listed in a desired period, touch the "Period" switch. Touch the number keys. After setting the period, touch the "OK" switch. The "Memo list" screen will be - 2005 Toyota Sequoia | Navigation Manual - Page 108
OTHER FUNCTIONS Screen adjustment The brightness or contrast of the screen can be adjusted depending on the brightness of your surroundings. You can also turn the display off. To display the "Display" screen push the "DISPLAY" button. The screen goes off when you touch the "SCREEN OFF" switch. To - 2005 Toyota Sequoia | Navigation Manual - Page 109
tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video, DVD audio and video CD are being played. "COLOR" "RED": Strengthens the red color of the screen. "COLOR" "GREEN": Strengthens the green color of the screen. "TONE" "+": Strengthens the - 2005 Toyota Sequoia | Navigation Manual - Page 110
" screen. (a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Background color You can select a background color. 2. Touch the "Screen Setting" switch. Select "ON" or "OFF" and then touch the "OK" switch. "ON": The - 2005 Toyota Sequoia | Navigation Manual - Page 111
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system V Quick reference ...112 Using your audio system ...113 Audio system operating hints ...140 V 111 - 2005 Toyota Sequoia | Navigation Manual - Page 112
AUDIO SYSTEM Quick reference 1 2 3 4 5 6 7 Function switch display screen Touch the switches displayed on the screen to control the radio and disc players. For details, see page 114. "TUNE" knob Turn this knob to move the station band up or down. For details, see page 116. "AM·SAT" - 2005 Toyota Sequoia | Navigation Manual - Page 113
when the engine is not running. (a) Turning the system on and off "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display switches for audio system (audio control mode). You - 2005 Toyota Sequoia | Navigation Manual - Page 114
come on again. The switches for radio, compact disc player and DVD player (with rear seat entertainment system) operation are displayed on the function switch display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted - 2005 Toyota Sequoia | Navigation Manual - Page 115
or broadcast, changing the right/left balance will oil any part of the compact disc player. Do not insert anything other than compact discs into the slot. The player is intended for use with 12 cm (4.7 in.) discs only. Touching the "SOUND" switch displayed on the screen at the audio control - 2005 Toyota Sequoia | Navigation Manual - Page 116
AUDIO SYSTEM (d) Your DVD player (with rear seat entertainment system) You can enjoy the sound of the rear seat entertainment system by pushing up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" - 2005 Toyota Sequoia | Navigation Manual - Page 117
AUDIO SYSTEM (b) Presetting a station 1. Tune in the desired station. 2. Touch one of the switches (1 - 6) you want and hold it until a beep is heard. This sets the station to the switch and the frequency appears on the switch. Each radio mode (AM, FM1 or FM2) can store up to 6 stations. To change - 2005 Toyota Sequoia | Navigation Manual - Page 118
AUDIO SYSTEM "TYPE A "" switch If the system receives no RDS stations, "NO PTY" appears on the display. Each time you touch the "TYPE A" or "TYPE "" switch, the program type changes as in the following: D ROCK D MISC (Miscellaneous) D Inform (Information) D Easy Lis (Easy listening) D Cls/Jazz ( - 2005 Toyota Sequoia | Navigation Manual - Page 119
AUDIO SYSTEM - Compact disc player operation (a) Playing a compact disc The slot for the compact disc player is behind the display. To insert a compact disc, push the "OPEN" button to lower the display. Put the compact disc in the slot with the label side up. The player will automatically start - 2005 Toyota Sequoia | Navigation Manual - Page 120
not obstruct the display while it is moving. It could damage your audio system. To stop and eject the compact disc, push the "OPEN" button to lower the display. Push the " button. "DISC INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder - 2005 Toyota Sequoia | Navigation Manual - Page 121
on the screen. Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC" button again to switch to the compact disc player. If the rear seat entertainment system is on, pushing the "DISC" button switches the sound of the front audio system and that of the rear seat - 2005 Toyota Sequoia | Navigation Manual - Page 122
. Up to 29 letters can be displayed. (e) If the player malfunctions If "CD ERROR" appears on the screen, audio signals of the disc cannot be read or the system has trouble. Push the "DISC" button once again. If the player does not operate, check that the disc surface is not soiled or damaged. If - 2005 Toyota Sequoia | Navigation Manual - Page 123
CD, CD text, dts-CD or DVD audio only when a disc is loaded in the DVD player. Refer to "Rear seat entertainment system" for details. For appropriate discs for this player, see "Audio system operating hints" on page 140. (a) Inserting the disc 1. Pull up the console box lid while pushing the lock - 2005 Toyota Sequoia | Navigation Manual - Page 124
loaded in the same manner as for 12 cm (4.7 in.) discs. 4. Slide the lid forward to close the DVD player. The indicator light turns on while the disc is loaded. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. 5. Close the - 2005 Toyota Sequoia | Navigation Manual - Page 125
AUDIO SYSTEM (b) Ejecting a disc Slide the lid backward to open the DVD player. Push the disc eject button to eject a disc. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the console box closed while driving. (c) Playing a disc Push the "DISC" button - 2005 Toyota Sequoia | Navigation Manual - Page 126
AUDIO SYSTEM SELECTING A DESIRED TRACK "SEEK/TRACK" button: Use for direct access to a desired track. Push either side of the "SEEK/TRACK" button and hold it until the desired track number appears on the display. As you release the button, the player will start playing the selected track from the - 2005 Toyota Sequoia | Navigation Manual - Page 127
AUDIO SYSTEM (e) Operating a DVD video disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for - 2005 Toyota Sequoia | Navigation Manual - Page 128
SYSTEM DVD video DVD video DVD audio DVD audio PLAYING A DVD DISC Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If you touch a part - 2005 Toyota Sequoia | Navigation Manual - Page 129
screen appears. (See page 132.) D Top page of DVD audio controls "Top Menu": If you touch this switch, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "Audio": The audio changing screen appears. (See page 132.) ": The menu - 2005 Toyota Sequoia | Navigation Manual - Page 130
AUDIO SYSTEM SELECTING A MENU ITEM Enter the menu item using "Y", """, "B" and "A" switches and touch "Enter". The player starts playing video for that menu item. (For details, see the manual that comes with the DVD video disc provided separately.) Each time you touch "Shift Keys", the controls on - 2005 Toyota Sequoia | Navigation Manual - Page 131
AUDIO SYSTEM SELECTING THE BONUS GROUP DVD audio only - Enter the bonus group number on the number. Touch the "Enter" switch on the screen. The player starts playing the disc from the selected bonus group number. CHANGING THE STILL PICTURE DVD audio only - Touch the "Still Prev." or "Still Next - 2005 Toyota Sequoia | Navigation Manual - Page 132
AUDIO SYSTEM CHANGING THE AUDIO LANGUAGE DVD video only - Each time you touch "Audio", the language is selected from the ones stored in the discs and changed. When you touch "Back", the previous screen returns. CHANGING THE AUDIO FORMAT DVD audio only Each time you touch "Audio", another audio - 2005 Toyota Sequoia | Navigation Manual - Page 133
AUDIO SYSTEM Setup Menu 1 screen Setup Menu 2 screen SETUP MENU There are initial setting switches on the "Setup Menu 1" screen and "Setup Menu 2" screen. To change the screen, touch the "Top Page" or "Second Page" switch on the screen. After you change the initial setting, touch the "Enter" - 2005 Toyota Sequoia | Navigation Manual - Page 134
AUDIO SYSTEM 1. Touch "Parental". 2. "Display Mode" on the "Setup Menu 2" screen, the display mode is changed from wide mode to auto mode. ENTER LANGUAGE CODE 0920 0519 2608 1412 "Others" on the "Select Audio Lang." screen, "Select Subtitle Lang." screen or "Select DVD language" screen, you can - 2005 Toyota Sequoia | Navigation Manual - Page 135
AUDIO SYSTEM 0209 0214 0215 0218 0301 0315 0319 0325 0401 0426 0515 0520 0521 0601 0609 0610 0615 0625 0701 0704 0712 Bislama Bengali Tibetan Breton - 2005 Toyota Sequoia | Navigation Manual - Page 136
AUDIO SYSTEM 1513 1518 1601 1612 1619 1721 1813 1814 1815 1823 1901 1904 1907 1908 1909 Sindhi Sangho Serbo-Croatian Sinhalese Slovak Slovenian Samoan Shona Somali Albanian 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 2019 2020 2023 2111 2118 2126 Serbian Siswati - 2005 Toyota Sequoia | Navigation Manual - Page 137
CD PLAYING A VIDEO CD Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. V DISPLAYING OPERATION SWITCHES If you touch the part where switches are not located while you - 2005 Toyota Sequoia | Navigation Manual - Page 138
it correctly. If a disc which is not playable is inserted, "DISC CHECK" will also appear on the screen. For appropriate discs for this player, see "Audio system operating hints" on page 140. If "REGION CODE ERROR" appears on the display: It indicates that the DVD region code is not set properly. If - 2005 Toyota Sequoia | Navigation Manual - Page 139
DVD player, you cannot play the disc on the DVD player. For region codes, see page 139. Audio: This DVD player can play liner PCM, Dolby digital and MPEG audio format DVD. Other decoded type cannot be played. Title and chapter: Video and audio programs stored in DVD video disc are divided in parts - 2005 Toyota Sequoia | Navigation Manual - Page 140
into the DVD player. D The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your - 2005 Toyota Sequoia | Navigation Manual - Page 141
the air conditioning to cool the vehicle interior before you use the players. D Bumpy roads or other vibrations may make your compact disc player and DVD player skip. D If moisture gets into your compact disc player and DVD player, you may not play even though they appear to be working. Remove the - 2005 Toyota Sequoia | Navigation Manual - Page 142
SYSTEM Audio CDs DVD video discs DVD audio discs Video CDs " Special shaped discs " Low quality discs DVD player D Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy-protected CD CD-R (CD-Recordable) CD-R W (CD-Re-writable) CD-ROM DVD - 2005 Toyota Sequoia | Navigation Manual - Page 143
AUDIO SYSTEM NOTICE Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them - 2005 Toyota Sequoia | Navigation Manual - Page 144
AUDIO SYSTEM 144 - 2005 Toyota Sequoia | Navigation Manual - Page 145
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection - 2005 Toyota Sequoia | Navigation Manual - Page 146
appears and the system begins operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION" screen appears. either "English" or "Français" to select a language. Read Touch and follow the instructions. When you - 2005 Toyota Sequoia | Navigation Manual - Page 147
and become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow others to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when you - 2005 Toyota Sequoia | Navigation Manual - Page 148
etc.) frequently change. Therefore, before you follow any instruction from the system, look to see whether you can comply with the instruction safely and legally. This system cannot warn you about such things as the safety of an area, condition of streets, and availability of emergency services. If - 2005 Toyota Sequoia | Navigation Manual - Page 149
v - 2005 Toyota Sequoia | Navigation Manual - Page 150
Your navigation system - - Quick reference North-up or heading-up symbol This symbol indicates a map view with north-up or heading-up. Touching this symbol changes the map orientation...9 2 Scale indicator This figure indicates the map scale...9 3 "INFO" button Push this button to display the " - 2005 Toyota Sequoia | Navigation Manual - Page 151
to display the "Destination" screen...x, 20 14 Screen configuration switch Touch this switch to change the screen mode...53 8 "MENU" button Push this button to display the " 17 "GPS" mark (Global Positioning System) Whenever your vehicle is receiving signals from the GPS, this mark is displayed... - 2005 Toyota Sequoia | Navigation Manual - Page 152
...34 5 "Memory" switch You can select the location from those registered as the "Memory points". (To register memory points, see page 66.) ...33 6 "Emergency" switch You can select one of the three categories of emergency service points that have been already stored in the system's database...32 x - 2005 Toyota Sequoia | Navigation Manual - Page 153
time. To use this function, it is necessary to set the "Attribute" for the memory point. (To register the "Home", see page 70.) ...22 14 "Change" switch To change the search area, touch this switch...20 13 xi - 2005 Toyota Sequoia | Navigation Manual - Page 154
. 1 "Map DVD" switch Displays information regarding the disc version or covered area...12 2 "Select User" switch Enables recall of up to three memorized user setting patterns...63 3 "Setup" switch Enables various settings for the navigation system...76 4 "My Places" switch Enables changes to "Memory