2005 Toyota Sienna Owners Manual - Page 217

2005 Toyota Sienna Manual

Page 217 highlights

05 SIENNA_U (L/O 0409) You cannot set a desired speed if the master warning light comes on, the alarm sounds and the display indicates the warning code "E3". If this code appears on the display, see "CONVENTIONAL CRUISE CONTROL MODE FAILURE WARNING" on page 218. CANCELLING THE PRESET SPEED You can cancel the preset speed by doing any of the following: a. Pulling the direction. SETTING THE DESIRED SPEED The transmission must be in "D" before you set the cruise control speed in the conventional cruise control mode. Bring your vehicle to the desired speed, push the lever down in the " − SET" direction and release it. This sets the vehicle at that speed and the display shows the preset speed. You can now take your foot off the accelerator pedal. If you need to accelerate-for example, when passing-depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you release the accelerator pedal, the vehicle will return to the speed set prior to acceleration. lever in the "CANCEL" If the preset speed automatically cancels out for other than the above reasons, do not operate the cruise control. Although it is no problem to continue driving, have your vehicle checked by your Toyota dealer at the earliest opportunity. RESETTING TO A FASTER SPEED Push the lever up in the "+ RES" direction and hold it. Release the lever when the desired speed is attained. While the lever is held up, the vehicle will gradually gain speed. When the difference between the actual vehicle speed and the set speed is less than 5 km/h (3 mph), the set speed can be increased 1.6 km/h (1 mph) each time by pushing the lever up in the "+ RES" direction quickly within 0.6 seconds. However, a faster way to reset is to accelerate the vehicle and then push the lever down in the "− SET" direction. b. Depressing the brake pedal. c. Pressing the "ON−OFF" button. In the following cases, the preset speed automatically cancels out: a. The vehicle speed falls below about 40km/h (25 mph). b. If the vehicle speed drops 16 km/h (10 mph) below the preset speed, the preset speed will also automatically be cancelled. c. The slip indicator light blinks and an alarm sounds. (This occurs when the vehicle is about to skid.) If cancelled by b., the preset speed data is cleared and you must set the speed from the beginning. 217 2005 SIENNA from Sep. '04 Prod. (OM45431U)

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.