2005 Toyota Sienna Navigation Manual
2005 Toyota Sienna Manual
2005 Toyota Sienna manual content summary:
- 2005 Toyota Sienna | Navigation Manual - Page 1
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation I Display operation ...2 Touch switch operation ...2 Inputting letters and numbers ...3 Current position display ...5 Screen scroll operation (one-touch scroll) ...5 Map scale ...9 Orientation of the map ...9 Limitations - 2005 Toyota Sienna | Navigation Manual - Page 2
order. If you turn the ignition switch off, the display will automatically move back to position 0 . The display will automatically resume the previous position when the ignition switch is turned to the "ACC" or "ON" position. INFORMATION Under extremely cold conditions, the display may react - 2005 Toyota Sienna | Navigation Manual - Page 3
To display the alphabet keys, touch the D To input numerals and symbols To display the number keys and symbol keys, touch the "0-9" switch. D To display the list "A-Z" switch or the " " switch. Enter numerals and symbols by touching the number keys and symbol keys directly. : Touching this - 2005 Toyota Sienna | Navigation Manual - Page 4
BASIC FUNCTIONS D List screen operation When a list is displayed, you can scroll or page through the list by using the appropriate switch. If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of - 2005 Toyota Sienna | Navigation Manual - Page 5
After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page 77. The current vehicle position mark appears in the center - 2005 Toyota Sienna | Navigation Manual - Page 6
remains centered at the selected location until you switch. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If there is already a preset destination, touch the "Add to " switch or the "Replace " switch - 2005 Toyota Sienna | Navigation Manual - Page 7
where the cursor is set Touch the "Info." switch. The registered point is shown by on the map. To change the icon or name, etc., see page the "Add to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set an additional - 2005 Toyota Sienna | Navigation Manual - Page 8
to " switch and the "Replace " switch are displayed. When there is already a preset destination, using the "Add to " switch to set switch. (For details, see page 68.) Touch the "Info." switch. Information such as the name, location, and phone number are displayed. If you touch the "Enter " switch - 2005 Toyota Sienna | Navigation Manual - Page 9
until the Touch the scale bar changes normally. If you continue to touch on the switch, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving. The map scale is displayed under the northup symbol or heading - 2005 Toyota Sienna | Navigation Manual - Page 10
BASIC FUNCTIONS You can change the orientation of the map from north-up to heading-up . However, the accurate position may not be shown depending on the satellite condition, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by - 2005 Toyota Sienna | Navigation Manual - Page 11
of direction by going forward and backward, or turning on a turntable in the parking lot. When leaving a covered parking lot or parking garage. When a roof carrier is installed. When driving with tire chains installed. When the tires are worn. After replacing a tire or tires. When using tires that - 2005 Toyota Sienna | Navigation Manual - Page 12
driving. In auto reroute, a detour route may be shown. After auto reroute, the route may not be changed. An unnecessary U-turn may be shown or announced. A location THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS SET FORTH BELOW. OWNERSHIP The DATABASE and the copyrights and - 2005 Toyota Sienna | Navigation Manual - Page 13
it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. DISCLAIMER OF WARRANTY GDT does not warrant or make any representations regarding, either express or implied, regarding the use or results - 2005 Toyota Sienna | Navigation Manual - Page 14
WARNINGS inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used infoUSA"). By using the POI Data, you accept and agree to all terms and conditions set forth below. 1. Ownership All rights, title and interest to the infoUSA - 2005 Toyota Sienna | Navigation Manual - Page 15
Only. You agree to use this information for solely personal, non-commercial purposes, and not for service bureau, time-sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble - 2005 Toyota Sienna | Navigation Manual - Page 16
OR CONDITIONS, owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product. There are two types of areas available for route guidance. In one type of area, primarily around metropolitan centers locations are often changed - 2005 Toyota Sienna | Navigation Manual - Page 17
D To confirm the database version and disc coverage area 1. Push the "MENU" button. To display the disc coverage area, touch the "Covered Area" switch. Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. The map database is normally - 2005 Toyota Sienna | Navigation Manual - Page 18
display. To lower the display, push the "OPEN" button. After replacing map disc, push the button again to close the display. CAUTION D the vehicle during sudden braking or in an accident. D To reduce the chance of injury in the case of an accident or sudden stopping while driving, keep the display - 2005 Toyota Sienna | Navigation Manual - Page 19
DESTINATION INPUT AND ROUTE GUIDANCE SECTION Basic functions in frequent use II 20 20 22 22 22 26 29 32 33 34 34 35 36 37 37 38 38 40 40 42 44 49 51 52 53 57 58 DESTINATION INPUT AND ROUTE GUIDANCE Destination input ...Selecting the search area ...Destination input by Home ...Destination input by - 2005 Toyota Sienna | Navigation Manual - Page 20
may not be available if there is no road data for the specified location. D When setting the destination on a map with a scale larger than 0.5 mile (800 m), the map scale changes to 0.5 mile (800 m) automatically. Set the destination again. D To select an "Address", "POI Name", "Freeway Ent./Exit - 2005 Toyota Sienna | Navigation Manual - Page 21
DESTINATION INPUT AND ROUTE GUIDANCE U.S.A. Switch "US1" "US2" States included in the search area Idaho Island Vermont Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Canada Switch "CAN" Provinces and regions included in the search area All provinces and regions - 2005 Toyota Sienna | Navigation Manual - Page 22
page 70.) Touch any of the quick access switches on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route your home if you touch the "Enter" switch even while driving. INFORMATION Guidance starts from your current position to the quick - 2005 Toyota Sienna | Navigation Manual - Page 23
to display the screen for inputting a street name. When you find your desired street name, touch the corresponding switch. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If the same address exists - 2005 Toyota Sienna | Navigation Manual - Page 24
AND ROUTE GUIDANCE (b) Selecting a city to search Touch the "City" switch. Select or enter your desired city. "Input Name": To narrow down the listed items by inputting the city name. If you input a street name first, the screen changes. You can then input the house number. To search by city, the - 2005 Toyota Sienna | Navigation Manual - Page 25
name. If you have not used the navigation yet, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See page 23.) Input a city name. Touch the switch of the desired city name from the displayed list. The current screen - 2005 Toyota Sienna | Navigation Manual - Page 26
a house number or a street name. (See page 23.) Input the name of Point of Interest. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) If you input - 2005 Toyota Sienna | Navigation Manual - Page 27
by name. If the same name exists in more than one city, you can search for it more easily with the "City" and "Category" switches. (See "(a) Selecting a city to search" and "(b) Selecting from the categories".) To search by city, the following three methods are possible. 1. Selecting from the last - 2005 Toyota Sienna | Navigation Manual - Page 28
INPUT AND ROUTE GUIDANCE SELECTING FROM THE NEAREST 5 CITIES Touch the "Nearest 5 Cities" switch. INPUTTING THE CITY NAME Touch the "Input City Name" switch. Touch the switch of the desired city name from the displayed list. Input the city name. Touch the switch of the desired city name. 28 - 2005 Toyota Sienna | Navigation Manual - Page 29
by "POI Category" The destination can be set by selecting the POI category and the search point. Touch the "POI Category" switch on the "Destination" screen. "Category" switch. When you touch the desired category, the POI name list screen appears. If the desired POI category is on the screen - 2005 Toyota Sienna | Navigation Manual - Page 30
point It is possible to display the names of POIs located within approximately 20 miles (30 km) from the selected search point. Touch the "Search Point" switch. INPUTTING CITY CENTER Touch the "Input City Center" switch. Input the city center name. Touch the desired POI category from the list - 2005 Toyota Sienna | Navigation Manual - Page 31
scrolling stops. To set the position of the cursor, touch the "Enter" switch. When you touch an arrow facing the desired point, the map scrolls in scrolling stops. To set the position of the cursor, touch the "Enter" switch. When you touch an arrow facing the desired point, the map scrolls in - 2005 Toyota Sienna | Navigation Manual - Page 32
" switch on the "Destination" screen, the display changes to a screen to select dealers, hospitals or police stations. During driving, cursor, touch the "Enter" switch. When you touch the switch of the desired item, the screen changes and displays the map location of the selected destination and - 2005 Toyota Sienna | Navigation Manual - Page 33
registered attribute. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 12.) When you touch the switch of your desired memory point, the screen changes and displays the map location of the selected destination and the route preference. (See - 2005 Toyota Sienna | Navigation Manual - Page 34
The previous starting point and up to 99 previously set destinations are displayed on the screen. Touch the switch of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) "Date": To - 2005 Toyota Sienna | Navigation Manual - Page 35
" screen. Input the name of the two intersecting streets which are located near the destination to be set. Touch the switch of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See - 2005 Toyota Sienna | Navigation Manual - Page 36
use an "I" (I-405). US highways use the state designation before the number (CA-1 18). Touch the switch of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) "Dist - 2005 Toyota Sienna | Navigation Manual - Page 37
72.) Input the latitude and the longitude. When the input is finished, touch the "OK" switch. When you touch the switch of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See " - Entering destination" on page 38.) Input - 2005 Toyota Sienna | Navigation Manual - Page 38
input the destination, the screen changes and displays the map location of the selected destination and the route preference. "Replace ": To delete the existing destinations and set a new one. "Change": To change the route preference. (See page 39.) "Info.": If this switch is displayed on the top - 2005 Toyota Sienna | Navigation Manual - Page 39
three routes, touch the "3 Routes" switch on SCREEN B. You can turn the indicator on or off by touching the switch. When searching for a route, the system avoids routes where the indicator is dimmed as much as possible. After choosing conditions, touch the "OK" switch. Touch the "Quick1", "Quick2 - 2005 Toyota Sienna | Navigation Manual - Page 40
screen displays the route that guides the driver to the destination. The route to the destination is indicated by a highlighted line. Drive along the guided route. When the vehicle approaches a guidance point such as an intersection or a freeway, the screen automatically divides in two to display - 2005 Toyota Sienna | Navigation Manual - Page 41
quarter of a mile, traffic circle ahead, and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in - 2005 Toyota Sienna | Navigation Manual - Page 42
voice guidance volume, see page 63. "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished." 1. Touch the "Route" switch. 2. Touch the "Add" switch of "Destination". 42 - 2005 Toyota Sienna | Navigation Manual - Page 43
you can change the arrival order of the destinations. 1. Touch the "Route" switch. 4. Touch the desired "Add" switch to switch. The system searches for the guidance route again, and displays the entire route. Even if you do not touch the "OK" switch, the entire route is displayed automatically - 2005 Toyota Sienna | Navigation Manual - Page 44
. Setting and deleting route (a) Adding preferred road You can add points you wish to pass through. 2. Touch the tination". "Delete" switch of "Des1. Touch the "Route" switch. 3. When more than one destination is set, a list will appear on the screen. Touch the destination on the screen you wish - 2005 Toyota Sienna | Navigation Manual - Page 45
5. If more than one destination is set, the "Add Preferred Road" screen appears. Touch the "Add" switch where you wish to add a preferred road. 2. Touch the ferred road". "Delete" switch of "Pre- "Next" switch to use another 3. When more than one preferred road is set, a list will appear on the - 2005 Toyota Sienna | Navigation Manual - Page 46
"Quick1", "Quick2" or "Short" switch and touch the "OK" switch. 2. Touch the "Search Condition" switch. The "Search Condition" screen appears. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To add or change a route. (For details, see - 2005 Toyota Sienna | Navigation Manual - Page 47
route. "Whole Route": If you touch this switch, the system will calculate an entire new route to the destination. This picture shows an example of how the system would guide you around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs - 2005 Toyota Sienna | Navigation Manual - Page 48
guides the route on the freeway, but you drive on the parallel way along a freeway.) 1. Touch the "Route" switch. 3. You can turn the indicator on or off by touching the switch choosing the conditions, touch the "OK" switch. 2. Touch the "Route Preference" switch to change the conditions which are - 2005 Toyota Sienna | Navigation Manual - Page 49
of Interest category, symbols will appear on the map screen indicating where the POI addresses are located. To turn off the symbols of the Points of Interest on the map screen, touch the "POI Off" switch. "More": If you cannot find your desired Point of Interest on the limited choice screen, touch - 2005 Toyota Sienna | Navigation Manual - Page 50
switch, the list of the items searched along the route is displayed. Directly touch the Point of Interest icon that you wish to set as a destination. The map will shift so that the icon is centered the "Enter " switch. The screen changes and displays the map location of the selected destination - 2005 Toyota Sienna | Navigation Manual - Page 51
AND ROUTE GUIDANCE Route overview 1. Touch the "Map View" switch. The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (For details, see pages 42 and 44.) "Turn List": The following screen displays the list of the - 2005 Toyota Sienna | Navigation Manual - Page 52
desired point. The point which you choose is displayed on the map screen. Route preview : To indicate the next destination. 1. Touch the "Map View" switch. : To preview the route to the next destination. : To preview the route to the next destination in fast-forward mode. : To stop the preview - 2005 Toyota Sienna | Navigation Manual - Page 53
configurations. Depending on the conditions, it may not be possible to select certain screen configuration switches. : To display single map screen. (See page 53.) : To display dual map screen. (See page 54.) : To display compass mode screen. (See page 54.) : To display turn - 2005 Toyota Sienna | Navigation Manual - Page 54
any specific point on the right side map. This screen can perform the following procedures. D Changing the map scale D Displaying the POI icon D Changing the orientation of the map Touch the "OK" switch when you complete editing. The screen returns to the dual map screen. Information about the - 2005 Toyota Sienna | Navigation Manual - Page 55
screen (f) Freeway information screen The screen shows the turn list. You cannot scroll through the list of roads ": To display the selected map of the exit vicinity. On the left side of the "Map" switch, up to five POIs around the selected exit are displayed. : To scroll for farther junctions or - 2005 Toyota Sienna | Navigation Manual - Page 56
GUIDANCE INFORMATION When you drive on a freeway, the screen is automatically divided into two parts, with freeway information screen on the right side. (g) Intersection guidance screen/guidance screen on freeway D Intersection guidance screen This screen automatically appears when the vehicle - 2005 Toyota Sienna | Navigation Manual - Page 57
following screen. 2. Touch the number switch of the destination you wish to display. The distance and the estimated travel time from the current position to the selected destination are displayed. Displayed while driving along the guidance route. Displayed while driving off the guidance route. The - 2005 Toyota Sienna | Navigation Manual - Page 58
to the foot print map The switch changes into the switch when the map is scaled down to 150 feet (50 m). INFORMATION D If the map or the current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print - 2005 Toyota Sienna | Navigation Manual - Page 59
2. Using an eight-direction arrow, move the cursor to the position of the building you wish to display information. 3. Touch the "Building Info." switch. 4. Details of POIs in some buildings may be displayed. If you wish to see detailed POI information, touch the building name. You can see - 2005 Toyota Sienna | Navigation Manual - Page 60
DESTINATION INPUT AND ROUTE GUIDANCE 60 - 2005 Toyota Sienna | Navigation Manual - Page 61
modes ...Notifying traffic restriction ...Intersection guidance ...Guidance screen on freeway ...Street name on scroll map ...Display of building shape ...Function) ...Screen layout function ( POI category change (Show POI Icons) ...Delete previous point ...Map color ...Screen animation ... 61 - 2005 Toyota Sienna | Navigation Manual - Page 62
screen and touch the "Resume Guidance" switch. Push the "MENU" button to display the "Menu" screen and touch the "Suspend Guidance" switch. INFORMATION When you do not have route guidance, the "Suspend Guidance" switch cannot be used. The screen will change to the current position map with route - 2005 Toyota Sienna | Navigation Manual - Page 63
to other screens. "Adaptive Volume Control": If you turn the "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the switch. The indicator will be highlighted. Push the "MENU - 2005 Toyota Sienna | Navigation Manual - Page 64
screen will appear. To register, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. When you touch the switch already registered, this screen appears. To replace, touch the "Yes" switch. To cancel the replacement, touch the "No" or "Back" switch. 64 - 2005 Toyota Sienna | Navigation Manual - Page 65
user D To delete user Push the "MENU" button to display the "Menu" screen. Then touch the "Select User" switch. Touch the "User wish to change. number" switch you Touch the "Delete" switch of "User number" you wish to delete. The above message appears, then the map screen will be displayed. 65 - 2005 Toyota Sienna | Navigation Manual - Page 66
.) and use the memory points to input a destination. (a) Registering memory points The confirmation screen appears. To delete, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places - 2005 Toyota Sienna | Navigation Manual - Page 67
.) When you finish memory point registration, the memory point data screen will appear. You can set the icon, attribute, name, location and phone number. Touch the desired switch you want to set. (For details, see "(b) Editing memory points".) INFORMATION Up to 106 memory points can be registered - 2005 Toyota Sienna | Navigation Manual - Page 68
(b) Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. 2. Touch the "Edit" switch of the "Memory Points". The screen lists the - 2005 Toyota Sienna | Navigation Manual - Page 69
"Icon" Touch the desired icon. You can turn the page by touching "Page 1", "Page 2" or "With Sound" switch. "With Sound": To display sound icons. When your vehicle approaches the memory point, the sound which you chose will sound. Touch the desired sound icon. - 2005 Toyota Sienna | Navigation Manual - Page 70
ADVANCED FUNCTIONS D To change "Attribute" For easy destination input, set the attribute of the memory points as Home or Quick access 1 to 5. To replace the attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the desired attribute. It is - 2005 Toyota Sienna | Navigation Manual - Page 71
ADVANCED FUNCTIONS D To change "Name" D To change "Location" To delete an attribute, touch the "Yes" switch. To return to the previous screen, touch the "No" or "Back" switch. Touch the alphabet and/or numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The - 2005 Toyota Sienna | Navigation Manual - Page 72
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) (c) Deleting memory points 1. Push the "MENU" button to display the "Menu" screen and touch the "My Places" switch. Touch numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The previous screen will be - 2005 Toyota Sienna | Navigation Manual - Page 73
to display the following screen. (a) Registering area to avoid 1. Touch the "Register" switch of the "Areas to avoid". 3. Set the cursor in the center of the area to avoid, and touch the "Enter" switch. 2. Enter the location in the same way as inputting a destination, or display the map of the - 2005 Toyota Sienna | Navigation Manual - Page 74
FUNCTIONS (b) Editing area to avoid 1. Touch the "Edit" switch of the "Areas to Avoid" to display the "Edit Area to Avoid" screen. 4. Touch either or switch to change the size of the area to avoid. 3. Touch the "Name" , "Location" or "Area Size" switch on this screen. 2. To edit an area to avoid - 2005 Toyota Sienna | Navigation Manual - Page 75
ADVANCED FUNCTIONS D To change "Name" D To change "Location" D To change "Area size" Touch alphabet or numeral keys. When the entry has been completed, touch the "OK" switch on the screen. The previous screen will be displayed. D "Show Name" The avoid area name can be set to be displayed or not - 2005 Toyota Sienna | Navigation Manual - Page 76
": This switch initializes all of the settings. "Calibration": You can adjust the current vehicle position mark manually. "Distance automatically search for a new route to the destination. "Adjust Time Zone": You can select your desired time zone. "Auto Voice Guidance": You can set the automatic - 2005 Toyota Sienna | Navigation Manual - Page 77
map screen. " Function": You can set to display or not to display each switch and current street name on the map screen. "Show POI Icons": You can driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually - 2005 Toyota Sienna | Navigation Manual - Page 78
your desired location. Touch the "Enter" switch. 2. Touch either the or switch to adjust the direction of the current vehicle position mark. Touch the "Enter" switch and the map screen will be displayed. D Tire change calibration The tire change calibration function will be used when replacing the - 2005 Toyota Sienna | Navigation Manual - Page 79
You can set the speed that is used for the calculation of the estimated travel time. 2. Touch the "Setup" switch. 3. Touch the "km" or "miles" switch of "Distance" to choose the distance unit. The selected switch is highlighted in green. 4. Touch the "OK" switch. 1. Push the "MENU" button. 79 - 2005 Toyota Sienna | Navigation Manual - Page 80
along the route, which may be affected by road conditions such as traffic jams, construction work. D It is possible to display up to 99 hours 59 minutes. 2. Touch the "Setup" switch. 4. Touch or to set the average vehicle speeds for driving on a Freeway, Main street, and Residential. To set the - 2005 Toyota Sienna | Navigation Manual - Page 81
the system will automatically search for a new route to the destination if you stray from the guidance route. This feature does not operate while you are driving on roads where guidance is not available. To turn the "Auto Reroute" mode on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto - 2005 Toyota Sienna | Navigation Manual - Page 82
, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if you push the "MAP/ VOICE" button. To turn the "Auto Voice Guidance" mode on: 1. Push the "MENU" button. 3. Touch the "Change" switch. The "Adjust Time Zone - 2005 Toyota Sienna | Navigation Manual - Page 83
be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 3. Touch the "On" switch of "Auto Voice Guidance". The selected switch is highlighted in green. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen - 2005 Toyota Sienna | Navigation Manual - Page 84
you of traffic or seasonal restrictions. 3. Touch the "On" switch of "Voice Guidance in All Modes" and touch the "OK" switch. To turn the "Notify Traffic Restriction" mode on: 1. Push the "MENU" button. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. 84 - 2005 Toyota Sienna | Navigation Manual - Page 85
the intersection guidance screen if you drive with route guidance. 3. Touch the "On" switch of "Notify Traffic Restriction" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. To turn the "Intersection Guidance" mode on: 1. Push - 2005 Toyota Sienna | Navigation Manual - Page 86
display the lane guidance screen if you drive on a freeway with route guidance. 3. Touch the "On" switch of "Intersection Guidance" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch to display page 2 of the touch "Setup" screen. To turn the "Guidance Screen on Freeway" mode - 2005 Toyota Sienna | Navigation Manual - Page 87
where the cursor is positioned on the scroll map. 3. Touch the "On" switch of "Guidance Screen on Freeway" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. To turn the "Street Name on Scroll Map" mode on: 1. Push the "MENU - 2005 Toyota Sienna | Navigation Manual - Page 88
of 150 feet (50 m) to 300 feet (100 m). 3. Touch the "On" switch of "Street Name on Scroll Map" and touch the "OK" switch. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. To turn the "Display Building Shape" mode on: 1. Push the "MENU" button. 88 - 2005 Toyota Sienna | Navigation Manual - Page 89
street name on the map screen. 1. Push the "MENU" button. 3. Touch the "On" switch of "Display Building Shape" and touch the "OK" switch. 3. Touch the "Change" switch of the " Function". 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 4. Touch the - 2005 Toyota Sienna | Navigation Manual - Page 90
"Show POI Icons" top screen, so that you can easily set which icons to display on the map screen. 2. Touch the "Setup" switch. Then switch twice to display page 3 of touch the "Setup" screen. 3. Touch the "Change" switch of "Show POI Icons". 1. Push the "MENU" button. 4. Touch the category - 2005 Toyota Sienna | Navigation Manual - Page 91
point You can delete your previous destination. 1. Push the "MENU" button. 5. Touch the switch corresponding to the desired category. Then touch the "OK" switch. 2. Touch the "Setup" switch. Then touch switch twice to display page 3 of the "Setup" screen. 3. Touch the vious Point". "Delete - 2005 Toyota Sienna | Navigation Manual - Page 92
efficient previous point search, previous points can be sorted by the "Date" or "Name" switch. 5. To delete the point, touch the "Yes" switch. To cancel the deletion, touch the "No" switch. 2. Touch the "Setup" switch. Then switch three times to display touch page 4 of the "Setup" screen. 92 - 2005 Toyota Sienna | Navigation Manual - Page 93
day and/or night map and then touch the "OK" switch to return the map screen. Touch the "Normal" switch to return to the default map color. Screen animation When the "Screen Animation" feature is turned on, some switches and screens become animated. (e.g.: change map guidance on the map screen) To - 2005 Toyota Sienna | Navigation Manual - Page 94
ADVANCED FUNCTIONS 94 - 2005 Toyota Sienna | Navigation Manual - Page 95
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions IV Maintenance information ...96 Calendar with memo ...101 Screen adjustment ...108 Screen setting ...110 95 - 2005 Toyota Sienna | Navigation Manual - Page 96
screen will appear every time the system is turned on until you touch the 1. Push the "INFO" button to display the "Information Menu" screen. Touch the "Maintenance" switch to display the "Maintenance" screen. 2. Touch the desired icon and input the conditions. "Do not display this message again - 2005 Toyota Sienna | Navigation Manual - Page 97
to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on the driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. Rotate tires Replace tires Replace battery Replace brake linings Replace wiper blades 97 - 2005 Toyota Sienna | Navigation Manual - Page 98
the dealer name, staff, location and phone number. Replace brake fluid Replace ATF 2. Enter the location of the dealer in the same way as for destination input. (See page 20.) 1. Touch the "Set Dealer" switch on the "Maintenance" screen. Replace air filter Scheduled maintenance Personal event - 2005 Toyota Sienna | Navigation Manual - Page 99
of the dealer. If it is OK, touch the "Enter" switch. The screen changes to "Edit Dealer" screen. (See "(b) Edit dealer".) You can edit the dealer name, staff, location and phone number. 1. Touch the "Set Dealer" switch on the "Maintenance" screen. The "Edit Dealer" screen appears. 2. To edit - 2005 Toyota Sienna | Navigation Manual - Page 100
OTHER FUNCTIONS D To edit "Dealer" or "Contact" D To edit "Location" D To edit "Phone #" (telephone number) To input the name, touch the alphabet, numeral and/or umlaut keys. You can input up to 24 letters. After inputting, touch the "OK" switch at the bottom right of the screen. The previous - 2005 Toyota Sienna | Navigation Manual - Page 101
will appear on the screen. To delete, touch the "Yes" switch. To cancel the deletion, touch the "No" or "Back" switch. Touch the "Enter " switch on the "Set Dealer" screen. The screen changes and displays the map location of the registered dealer and the "Route Preference". (See " - Entering - 2005 Toyota Sienna | Navigation Manual - Page 102
To display the "Information Menu" screen, push the "INFO" button. Then touch the "Calendar" switch. The current date is circled in yellow. If the current date is not displayed on the screen, touch the "Today" switch to display the current month calendar. 1. Touch the day you want to add a memo - 2005 Toyota Sienna | Navigation Manual - Page 103
using the keys. You can enter text up to 24 letters. After entering the text, touch the "OK" switch at the bottom right of the screen. Touch the "Location" switch to set location. A screen similar to the destination input screen appears. Input the same way as inputting a destination. (See page 20 - 2005 Toyota Sienna | Navigation Manual - Page 104
OTHER FUNCTIONS D Mark color D Date color The date inputted is marked as shown above. You can choose the desired mark and/or date color. Touch the "Mark" switch. Touch the "Date" switch. Touch your desired color for the mark. 104 - 2005 Toyota Sienna | Navigation Manual - Page 105
the mark and/or date for the date you added the memo and/or location. To default the date color, touch the "Delete" switch on the screen. After you choose the date and/or mark color, touch the "OK" switch to display the previous screen. To add a memo, touch the corresponding date. The - 2005 Toyota Sienna | Navigation Manual - Page 106
OTHER FUNCTIONS (d) Editing a memo (e) Memo list To edit a memo, touch the corresponding date, and then touch the memo you wish to edit. Touch the switch. "Memo" or "Location" 1. To list the memos you added, touch the "List" switch. 106 - 2005 Toyota Sienna | Navigation Manual - Page 107
OTHER FUNCTIONS 2. Touch the desired search condition to list the memos. The "Memo List" is displayed on the screen. To display the memos listed in a desired period, touch the "Period" switch. Touch the number keys. After setting the period, touch the "OK" switch. The "Memo List" screen will be - 2005 Toyota Sienna | Navigation Manual - Page 108
. To turn the display screen back on, push any button such as "INFO", etc. The selected screen appears. INFORMATION When you do not touch any switch on the screen for 20 seconds the "Display" screen goes off. To edit: Touch the corresponding "Memo" or "Location" switch. (See page 106 for details - 2005 Toyota Sienna | Navigation Manual - Page 109
To display the screen in the day mode even with the headlight switch on, touch the "DAY MODE" switch on the adjustment screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine - 2005 Toyota Sienna | Navigation Manual - Page 110
the audio screen. (b) Background color You can select a background color. 2. Touch the "Screen Setting" switch. Select "ON" or "OFF" and then touch the "OK" switch. "ON": The navigation screen automatically returns from the audio screen 20 seconds after the end of audio operation. "OFF": The - 2005 Toyota Sienna | Navigation Manual - Page 111
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system V Quick reference ...112 Using your audio system ...113 Audio system operating hints ...139 V 111 - 2005 Toyota Sienna | Navigation Manual - Page 112
AUDIO SYSTEM Quick reference 1 2 3 4 5 6 7 Function switch display screen Touch the switches displayed on the screen to control the radio and disc players. For details, see page 114. "TUNE" knob Turn this knob to move the station band up or down. For details, see page 116. "AM" button Push - 2005 Toyota Sienna | Navigation Manual - Page 113
": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display switches for audio system (audio control mode). You can select the function that enables automatic return to the previous screen - 2005 Toyota Sienna | Navigation Manual - Page 114
will be turned off when you eject the compact disc. If the other function was previously playing, it will come on again. The switches for radio the function switch display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is - 2005 Toyota Sienna | Navigation Manual - Page 115
recording or broadcast, changing the right/left balance will increase the volume balance as follows. To adjust the tone, touch the "+" or "-" switch on the screen. To adjust the balance between the front and rear speakers, touch the "FRONT" or "REAR" switch on the screen, and to adjust the balance - 2005 Toyota Sienna | Navigation Manual - Page 116
to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely - 2005 Toyota Sienna | Navigation Manual - Page 117
on the switch. Each radio mode (AM, FM1 or FM2) can store up to 6 stations. To change the preset station to a different one, follow the same procedure. The preset station memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station - 2005 Toyota Sienna | Navigation Manual - Page 118
the program type changes as in the following: D ROCK D MISC (Miscellaneous) D Inform (Information) D Easy Lis (Easy listening) D Cls/Jazz (Classical music and Jazz) D R & B (Rhythm and Blues) D Religion D Alert (Emergency message) "TYPE SEEK" switch When a program is set, "TYPE SEEK" switch appears - 2005 Toyota Sienna | Navigation Manual - Page 119
announcement "TRAF" switch A station that regularly broadcasts traffic information is automatically located. When you push the "TRAF" switch, "TRAF SEEK" vehicle during sudden braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the - 2005 Toyota Sienna | Navigation Manual - Page 120
audio system. To stop and eject the compact disc, push the "OPEN" button to lower the display. Push the " button. "DISC INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 120 - 2005 Toyota Sienna | Navigation Manual - Page 121
" button if a compact disc is already loaded in the slot. "CD" appears on the screen. Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC" button again to switch to the compact disc player. If the rear seat entertainment system is on, pushing the "DISC" button - 2005 Toyota Sienna | Navigation Manual - Page 122
playing. When the track is finished, the player will automatically go back to the beginning of the track and play the track again. To cancel it, touch the switch once again. "RAND" switch: Use it for automatic and random selection. When the switch is touched, the system selects a track in the disc - 2005 Toyota Sienna | Navigation Manual - Page 123
entertainment system" for details. For appropriate discs for this player, see "Audio system operating hints" on page 139. (a) Inserting the disc The indicator light turns on while the disc is loaded. If the label faces forward, the disc cannot be played. In this case, "DISC CHECK" appears on the - 2005 Toyota Sienna | Navigation Manual - Page 124
the "DISC" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD player is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating an audio CD PLAYING AN AUDIO CD CD text only - The disc title and track title will - 2005 Toyota Sienna | Navigation Manual - Page 125
a DVD video disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately - 2005 Toyota Sienna | Navigation Manual - Page 126
displayed after you turn the ignition key to "ACC" or "ON". Touch "OK" when you read the message. DVD video DVD audio PLAYING A DVD DISC Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the - 2005 Toyota Sienna | Navigation Manual - Page 127
" switch: Touching this will turn off the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) ": The menu control a part of the screen, where controls are not located while you are watching video, DVD controls will appear. - 2005 Toyota Sienna | Navigation Manual - Page 128
131.) D Top page of DVD audio controls "Top Menu": If you touch this switch, the menu screen for DVD audio appears. (For operation, refer to the DVD audio disc manual that is provided separately.) "Audio": The audio changing screen appears. (See page 131.) ": The menu control key appears on " the - 2005 Toyota Sienna | Navigation Manual - Page 129
the "SEEK/ TRACK ƜƝ" button, you can select a track. When you touch "Back", the previous screen returns. SELECTING THE BONUS GROUP DVD audio only - Enter the bonus group number on the searching group screen and push the "Enter" switch. The "Enter Key Code" screen will appear. To enter the number of - 2005 Toyota Sienna | Navigation Manual - Page 130
or "Still Next" switch on the screen to forward or reverse the still pictures. CHANGING THE SUBTITLE LANGUAGE Each time you touch "Sub Title", the language is selected from the ones stored in the discs and changed. To turn off the subtitle, touch "Hide". When you touch "Back", the previous screen - 2005 Toyota Sienna | Navigation Manual - Page 131
AUDIO FORMAT DVD audio only - Each time you touch "Audio", another audio format stored on the disc is selected. When you touch "Back", the previous screen returns. CHANGING THE ANGLE The angle can be selected for discs that are multi-angle compatible when the angle mark appears on the screen. Each - 2005 Toyota Sienna | Navigation Manual - Page 132
the entry of language code, see the following "ENTER SUBTITLE LANGUAGE CODE". To return to the "Setup Menu 1" screen, touch the "Back" switch. D Angle mark The multi-angle mark can be turned on or off on the screen while the disc which is multi-angle compatible is being played. Each time you touch - 2005 Toyota Sienna | Navigation Manual - Page 133
AUDIO SYSTEM ENTER SUBTITLE LANGUAGE CODE 0920 0519 2608 1412 1620 1922 1821 1115 Italian Spanish Chinese Dutch Portuguese Swedish Russian Korean Greek Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari 0209 0214 0215 0218 0301 0315 0319 - 2005 Toyota Sienna | Navigation Manual - Page 134
AUDIO SYSTEM 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada - 2005 Toyota Sienna | Navigation Manual - Page 135
AUDIO SYSTEM 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 2019 2020 2023 VIDEO CD Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. V 135 - 2005 Toyota Sienna | Navigation Manual - Page 136
, the next track is searched and played. "Main/Sub" switch: A multiplex transmission changing switch. The mode changes from Main/Sub to Main, to Sub and back to Main/Sub by touching this switch. D Switches on second page " switch: Use this switch to pause " the video screen. When you touch this - 2005 Toyota Sienna | Navigation Manual - Page 137
switches and touch "Enter". The player starts playing video for that title number. You can select a track number by pushing "Ɯ" or "Ɲ" on the "SEEK/TRACK" button. Touch "Back may be too hot due to the very high ambient temperature. Remove the magazine from the player and allow the player to cool down - 2005 Toyota Sienna | Navigation Manual - Page 138
volume of data assigned to the picture is changed depending on the picture format has also been adopted be played at all, or violent scenes are skipped or replaced with other scenes. Level 1: DVD video discs for children can Macrovision Corporation and other rights owners. Use of this copyright - 2005 Toyota Sienna | Navigation Manual - Page 139
conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem possible for two signals to reach your antenna at the same time. If this radio station to sound alternately strong and weak. Station noise, such as high tension power - 2005 Toyota Sienna | Navigation Manual - Page 140
12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the players. D Bumpy roads or other vibrations may make your compact disc player and DVD player - 2005 Toyota Sienna | Navigation Manual - Page 141
AUDIO SYSTEM NOTICE Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. " Special shaped discs " Low quality discs V " - 2005 Toyota Sienna | Navigation Manual - Page 142
light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat, and direct sunlight. To clean a compact disc: Wipe it with a soft, lint-free cloth that has been dampened with water. Wipe in a straight line from the center - 2005 Toyota Sienna | Navigation Manual - Page 143
to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 10 through 12. i 2005 SIENNA Navigation from Sep. '04 Prod. (OM45419U) - 2005 Toyota Sienna | Navigation Manual - Page 144
. Read Touch and follow the instructions. When you touch the "I Agree" switch on the screen, the map screen appears. You can access this screen when you push the "INFO" button and touch the "Language" switch. Then you can select a language. NOTICE This is a warning against anything which may cause - 2005 Toyota Sienna | Navigation Manual - Page 145
understood the instructions in this manual. For your safety, some functions may become inoperable when you start driving. Unavailable switches are dimmed. You can input your destination and select your route only when the vehicle is not moving. CAUTION D For safety, the driver should not operate - 2005 Toyota Sienna | Navigation Manual - Page 146
instruction safely and legally. This system cannot warn you about such things as the safety of an area, condition of streets, and availability of emergency services. If you are unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver - 2005 Toyota Sienna | Navigation Manual - Page 147
v - 2005 Toyota Sienna | Navigation Manual - Page 148
"Information Menu" screen...ii, 96, 101, 110 4 Zoom out switch Touch this switch to reduce the map scale...9 5 "Mark" switch Touch this switch to register the cursor position as a memory point...6 6 "Route" switch Touch this switch to change the route...42, 44 7 "DISPLAY" button Push this button to - 2005 Toyota Sienna | Navigation Manual - Page 149
and display the current position...5, 6, 42 13 "DEST" button Push this button to display the "Destination" screen...x, 20 14 Screen configuration switch Touch this switch to change the screen mode...53 8 "MENU" button Push this button to display the "Menu" screen...xii, 17, 61 16 Distance and time - 2005 Toyota Sienna | Navigation Manual - Page 150
from the previous starting point...34 5 "Memory" switch You can select the location from those registered as "Memory points". (To register memory points, see page 66.) ...33 6 "Emergency" switch You can select one of the three categories of emergency service points that have been already stored in - 2005 Toyota Sienna | Navigation Manual - Page 151
location on the displayed map...34 8 "Intersection" switch switch You can enter the name of a freeway (interstate) entrance or exit...36 10 "Phone #" switch You can enter a destination by the telephone number...37 11 "Coordinates" switch switch page 70.) ...22 7 Home switch You can select your own - 2005 Toyota Sienna | Navigation Manual - Page 152
information regarding the disc version or covered area...12 2 "Select User" switch Enables recall of up to three memorized user setting patterns...63 3 "Setup" switch Enables various settings for the navigation system...76 4 "My Places" switch Enables changes to "Memory points" and "Areas to