2005 Toyota Tundra Owners Manual - Page 401

'05 TUNDRA_U (L/O 0408) -Blocking the wheel To remove the spare tire: 1. Put a jack handle, jack handle extension and jack handle end together as shown in the illustration. 1 Jack handle end 2 Jack handle extension 3 Jack handle CAUTION Make sure they are securely fixed with the screw. 2. Insert the end of the jack handle extension into the lowering screw and turn it counterclockwise with the handle. 3. After the tire is lowered completely to the ground, remove the holding bracket. When storing the spare tire, put it in place with the outer side of the wheel facing up. Then secure the tire, taking care that the tire goes straight up without catching on any other part, to prevent it from flying forward during a collision or sudden braking. 2. Block the wheel diagonally opposite the flat tire to keep the vehicle from rolling when it is jacked up. When blocking the wheel, place a wheel block in front of one of the front wheels or behind one of the rear wheels. 401 2005 TUNDRA from Aug. '04 Prod. (OM34427U)