2005 Toyota Tundra Owners Manual - Page 62

'05 TUNDRA_U (L/O 0408) Seat belts with an adjustable shoulder anchor- Adjust the shoulder anchor position to your size. Standard and double cab models- To raise: Slide the anchor up. To lower: Push in the lock release button and slide the anchor down. Access cab models- To raise: Slide the anchor up. To lower: Pull the lock release knob and slide the anchor down. After adjustment, make sure the anchor is locked in position. To release the belt, press the buckle release button and allow the belt to retract. If the belt does not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts. FRONT CENTER SEAT BELT (standard cab models with non−split bench seat) AND REAR CENTER SEAT BELT (access cab models) The center seat belt is a 3−point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure buckle 1 (with light gray buckle−release button) is securely latched for ready use of the center seat belt. CAUTION Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause severe injuries in a collision. 62 2005 TUNDRA from Aug. '04 Prod. (OM34427U)