2005 Toyota Tundra Owners Manual - Page 911

'05 TUNDRA_U (L/O 0504) -Changing wheels 6. After making sure that no one is in the vehicle, raise it high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. Standard cab models-To raise the vehicle, insert the jack handle into the jack (it is a loose fit) and turn it clockwise. As the jack touches the vehicle and begins to lift, double −check that it is properly positioned. Access cab and double cab models- To raise the vehicle, insert the jack handle extension into the jack (it is a loose fit) and turn it clockwise with the handle, making sure the handle remains firmly fitted onto the jack handle extension. As the jack touches the vehicle and begins to lift, double − check that it is properly positioned. CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 7. Remove the wheel nuts and change tires. Lift the flat tire straight off and put it aside. Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. 405 2005 TUNDRA from Apr. '05 Prod. (OM34440U)