2006 Toyota Land Cruiser Owners Manual - Page 191

With the active height control suspension turned off, if you operate the height select switch or the vehicle height is changing depending on the vehicle speed, the vehicle height control enters the ready mode. In this case, the height control indicator lights change as follows: 1. The present mode indicator light comes on and at the same time the ready mode indicator light blinks. 2. When the active height control suspension is turned on, the present mode indicator light goes off and the ready mode indicator light blinks. (The vehicle height changes.) 3. After the vehicle height has changed completely, the changed mode indicator light stays on. If the vehicle is loaded heavily, the vehicle height cannot be raised even if the height select switch is operated. If the underbody of the vehicle has touched the surface on bumpy roads, the vehicle height cannot be lowered with the height select switch. The height control indicator lights change as follows: 1. The present mode indicator light goes off and the selected mode indicator light blinks. 2. The selected mode indicator light goes off. (The vehicle height does not change.) The present mode indicator light comes on again. Height control "OFF" indicator light: When the ignition switch is turned on, this light comes on. If it goes out after a few seconds, the active height control suspension operates correctly. If you push the height control switch, the active height control is turned off. The height control "OFF" indicator light comes on. In the following cases, there is a problem somewhere in your active height control suspension. Although there is no problem to continue normal driving, have the active height control suspension checked by your Toyota dealer as soon as possible. D The height control "OFF" indicator light does not come on when the ignition switch is turned on. D The height control "OFF" indicator light blinks. 164