2006 Toyota Land Cruiser Owners Manual - Page 305

When connecting a jack handle extension with a jack handle end, use a jack handle to tighten the bolts on the joints as shown in the illustration. When connecting the jack handle with extension, tighten the wing bolt on the joint securely. Make sure the hollow meets the bolt on every joint when you tighten the bolts. 2. Remove the access hole cover on the rear bumper with a flathead screwdriver. To protect the paint, place several sheets of paper over the paintwork. 3. Insert the jack handle end into the lowering screw through the access hole and turn it counterclockwise with pushing it to the front lightly. NOTICE Tighten all the joints securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. 278