2006 Toyota Land Cruiser Owners Manual - Page 368

Service specifications ENGINE Valve clearance (engine cold), mm (in.): Intake 0.15 - 0.25 (0.006 - 0.010) Exhaust 0.25 - 0.35 (0.010 - 0.014) Spark plug type: DENSO SK20R11 NGK IFR6A11 Spark plug gap, mm (in.): 1.1 (0.043) ENGINE LUBRICATION Oil capacity (drain and refill), Imp.qt.) With filter 6.8 (7.2, 6.0) Without filter 6.4 (6.8, 5.6) Oil grade: "Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following grade and viscosity. Oil grade: API grade, SL "Energy- Conserving" or ILSAC multigrade engine oil L (qt., Outside temperature Recommended viscosity: SAE 5W- 30 COOLING SYSTEM Total capacity, L (qt., Imp.qt.) Without rear heater 14.7 (15.5, 12.9) With rear heater 15.4 (16.3, 13.6) Coolant type: "Toyota Super Long Life Coolant" is used in your Toyota vehicle at factory fill. In order to avoid technical problems, only use "Toyota Super Long Life Coolant" or similar high quality ethylene glycol based non- silicate, non- amine, non- nitrite, and non- borate coolant with long- life hybrid organic acid technology. (Coolant with long- life hybrid organic acid technology is a combination of low phosphates and organic acids.) Do not use plain water alone. Please contact your Toyota dealer for further details. BATTERY Open voltage∗ 12.6 - 12.8 12.2 - 12.4 11.8 - 12.0 ∗: Please contact your Toyota dealer for further details. at 20_C (68_F): V Fully charged V Half charged V Discharged Voltage that is checked 20 minutes after the key is removed with all the lights turned off Charging rates: 5 A max. 341