2006 Toyota Matrix Owners Manual - Page 104

'06 MATRIX_U (L/O 0508) Odometer and two trip meters 3. Trip meter reset knob-Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero. The same process can be applied for resetting the trip meter B. Outside temperature display This meter displays the odometer and two trip meters. 1. Odometer-Shows the total the vehicle has been driven. distance The displayed temperature ranges from −30_C (−22_F) up to 50_C (122_F). The key must be in the "ON" position. If an abnormality exists in the connection of the outside air temperature sensor, "−−" will appear on the display. If "−−" appears on the display, contact your Toyota dealer. There may be a case that "−−" appears momentarily when the ignition is quickly turned to "ON". It is normal if it goes out soon. 2. Two trip meters-Show two different distances independently driven since the last time each trip meter was set to zero. You can use one trip meter to calculate the fuel economy and the other to measure the distance on each trip. All trip meter data is cancelled if the electrical power source is disconnected. 104